A Circuit Design of Fingerprint Authentication Sensor

지문인식센서용 회로설계

  • 남진문 (연세대학교 전기전자공학과 VLSI & CAD연구실) ;
  • 정승민 (연세대학교 전기전자공학과 VLSI & CAD연구) ;
  • 이문기 (연세대학교 전기전자공학과 VLSI & CAD연구실)
  • Published : 2004.04.01

Abstract

This paper proposes an advanced circuit for fingerprint sensor signal processing. We increased the voltage between ridge and valley by modifying the parasitic capacitance eliminating circuit of sensor plate. The analog comparator was designed for comparing the sensor signal voltage with the reference signal voltage. 1-Pixel Fingerprint sensor circuit was designed and simulated, and the layout was performed.

반도체 방식의 용량형 지문인식센서의 신호처리를 위한 개선된 회로를 설계하였다. 최 상위 센서플레이트가 지문의 굴곡을 감지한 용량의 변화를 전압의 신호로 전환하기 위해서 전하분할 방식의 회로를 적용하였다. 지문센서 감도저하의 가장 큰 원인인 센서플레이트에 존재하는 기생용량을 최소화하고 융선(ridge)과 계곡(valley) 사이의 전압차를 향상시키기 위하여 기존과는 다른 아날로그버퍼회로를 설계하였다. 센서전압과 기준전압 신호를 비교하기 위해서 비교기를 설계하였다. 제안된 신호처리회로는 0.3$\mu\textrm{m}$ 표준 CMOS 공정으로 레이아웃을 실시하였다.

Keywords

References

  1. IEEE J. of Solid state circuits v.34 no.4 A 600-dpi Capacitive Fingerprint 센서 Chip and Image-Synthesis Technique J.W.Lee;D.J.Min;J.Y.Kim;W.C.Kim https://doi.org/10.1109/4.753679
  2. 1999 Symposium on VLSI Circuits Digest of Technical Papers A High-Resolution Capacitive Fingerprint Sensing Scheme with Charge-Transfer Technique and Automatic Contrast Emphasis H.Morimura;S.Shigematsu;K.Machida
  3. ISSCC Digest of Technical Papers A Robust 1.8V 250usW Direct-Contact 500dpi Fingerprint 센서 D.Inglis(et al.)
  4. IEEE J. of Solid-state circuits v.33 A Fingerprint 센서 Based on the Feedback Capacitive Sensing Scheme M.Tartagni;R.Guerrieri https://doi.org/10.1109/4.654945