Korea-Australia Rheology Journal

  • 제16권1호
  • /
  • Pages.47-54
  • /
  • 2004
  • /
  • 1226-119X(pISSN)
  • /
  • 2093-7660(eISSN)
한국유변학회 (The Korean Society of Rheology)
권호 표지

Rheological behavior of dilute bubble suspensions in polyol

  • Lim, Yun-Mee (School of Materials Science and Engineering, Seoul National University) ;
  • Dongjin Seo (School of Materials Science and Engineering, Seoul National University) ;
  • Youn, Jae-Ryoun (School of Materials Science and Engineering, Seoul National University)
  • 발행 : 2004.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Low Reynolds number, dilute, and surfactant-free bubble suspensions are prepared by mechanical mixing after introducing carbon dioxide bubbles into a Newtonian liquid, polyol. The apparent shear viscosity is measured with a wide-gap parallel plate rheometer by imposing a simple shear flow of capillary numbers(Ca) of the order of $10^{-2}$ ~ $10^{-1}$ and for various gas volume fractions ($\phi$). Effects of capillary numbers and gas volume fractions on the viscosity of polyol foam are investigated. At high capillary number, viscosity of the suspension increases as the gas volume fraction increases, while at low capillary number, the viscosity decreases as the gas volume fraction increases. An empirical constitutive equation that is similar to the Frankel and Acrivos equation is proposed by fitting experimental data. A numerical simulation for deformation of a single bubble suspended in a Newtonian fluid is conducted by using a newly developed two-dimensional numerical code using a finite volume method (FVM). Although the bubble is treated by a circular cylinder in the two dimensional analysis, numerical results are in good agreement with experimental results.

키워드

참고문헌

  1. Journal of Computational Physics v.100 A continuum method for modeling surface tension Brackbill,J.U.;D.B.Kothe;C.Zemach https://doi.org/10.1016/0021-9991(92)90240-Y
  2. Journal of Engineering Manufacture, Proc. Instn. Mech. Engrs. v.208 Ultrasonic bubble nucleation in reaction injection moulding of polyurethane Cho,W.J.;H.Park;J.R.Youn
  3. Physics of Fluids v.10 no.8 Drop breakup in three-dimensional viscous flows Cristini,V.;J.Blawzdziewicz;M.Loewenberg https://doi.org/10.1063/1.869697
  4. Journal of Fluid Mechanics v.44 The constitutive equation for a dilute emulsion Frankel,N.A.;A.Acrivos https://doi.org/10.1017/S0022112070001696
  5. Polymer Plastics Technology and Engineering v.39 no.1 Environmentally friendly processing of polyurethane foam for thermal insulation Kim,C.;J.R.Youn https://doi.org/10.1081/PPT-100100022
  6. Polymer Engineering and Science v.41 no.7 Reaction injection molding of polyurethane foam for improved thermal insulation Koo,M.S.;K.Chung;J.R.Youn https://doi.org/10.1002/pen.10819
  7. Fibers and Polymers v.3 no.4 Processing of polyurethane/polystyrene hybrid foam and numerical simulation Lee,W.H.;S.W.Lee;T.J.Kang;K.Chung;J.R.Youn https://doi.org/10.1007/BF02912661
  8. Computer Methods in Applied Mechanics and Engineering v.88 The ULTIMATE conservative difference scheme applied to unsteady one-dimensional advection Leonard B.P. https://doi.org/10.1016/0045-7825(91)90232-U
  9. Proceedings of the Royal Society of London. Series A v.458 The Rheology of a Bubbly Liquid Llewellin,E.W.;H.M.Mader;S.D.R.Wilson https://doi.org/10.1098/rspa.2001.0924
  10. Journal of Fluid Mechanics v.321 Numerical simulation of a concentrated emulsion in shear flow Loewenberg,M.;E.J.Hinch https://doi.org/10.1017/S002211209600777X
  11. Proceedings of the Royal Society of London. Series B v.63 Elastic constants of a solid containing spherical holes Mackenzie,J.K. https://doi.org/10.1088/0370-1301/63/1/302
  12. Rheology: Principles, Measurements, and Applications Macosko,C.V.
  13. Journal of Engineering for Industry, ASME Transactions v.114 no.3 Processing of cellular polyurethane by ultrasonic excitation Park,H.;J.R.Youn
  14. Polymer Engineering and Science v.35 no.23 Processing of Polyurethane microcellular foam by the reaction injection molding Park,H.;J.R.Youn https://doi.org/10.1002/pen.760352310
  15. Numerical heat transfer and fluid flow Patankar,S.V.
  16. Physics of Fluids v.13 no.1 Effect of inertia on drop breakup under shear Renardy,Y.Y.;V.Cristini https://doi.org/10.1063/1.1331321
  17. European Journal of Mechanics B/Fluids v.21 A new volume of fluid formulation for surfactants and simulations of drop deformation under shear at a low viscosity ratio Renardy,Y.Y.;M.Renardy;V.Cristini https://doi.org/10.1016/S0997-7546(01)01159-1
  18. Journal of Non-Newtonian Fluid Mechanics v.104 Effects of bubble deformation on the viscosity of dilute suspensions Rust,A.C.;M.Manga https://doi.org/10.1016/S0377-0257(02)00013-7
  19. International Journal for Numerical Methods in Fluids v.42 Numerical simulation of mold filling in foam reaction injection molding Seo,D.;J.R.Youn;C.L.TuckerⅢ https://doi.org/10.1002/fld.582
  20. Proceedings of the Royal Society of London. Series A v.138 Viscosity of a fluid containing small drops of another fluid Taylor,G.I. https://doi.org/10.1098/rspa.1932.0169
  21. Annual Reviews of Fluid Mechanics v.34 Microstructural Evolution in Polymer Blends Tucker C.L.;P.Moldenaers https://doi.org/10.1146/annurev.fluid.34.082301.144051
  22. Journal of Computational Physics v.153 A Method for Capturing Sharp Fluid Interfaces on Arbitray Meshes Ubbink,O.;R.I.Issa https://doi.org/10.1006/jcph.1999.6276
  23. Numerical Heat Transfer v.34 Performance and Accuracy of a Modified Full Multigrid Algorithm for Fluid Flow and Heat Transfer Yan,J.;F.Thiele https://doi.org/10.1080/10407799808915061
  24. Polymer Engineering and Science v.39 no.3 Bubble growth in reaction injection molded part foamed by ultrasonic exciation Youn,J.R.;H.Park https://doi.org/10.1002/pen.11435