A Comparison between the Thermomechanical and Structural Changes in Textured PET Yarns after Superheated Steam and Dry Heat Treatment

  • Published : 2004.03.01

Abstract

PET yarns textured at different texturing conditions were treated with superheated steam or dry heat at different temperatures for different times. The effects of the treatment conditions on the thermomechanical and structural changes of the yarn were examined by shrinkage, X-ray diffraction and birefringence measurements. With increase in superheated steam temperature, the crystalline orientation factor and birefringence decreased, whereas crystal size increased. Dry heat treatment had a smaller effect on shrinkage and structural properties in comparison with superheated steam treatment. The additional shrinkage after texturing process was investigated. The effect of heat-setting in both media was more significant at $200^{\circ}C$. The time dependence of the properties was not linear.

Keywords

References

  1. D. R. O'Dell and W. W. Carr, Text. Res. J., 66, 366 (1996) https://doi.org/10.1177/004051759606600603
  2. J. P. Schwartze and A.J. McKinnon, Text. Res. J., 70, 205 (2000) https://doi.org/10.1177/004051750007000305
  3. A. M. M. Bemardo, Drying Technol., 8, 767 (1990) https://doi.org/10.1080/07373939008959914
  4. S. Danielsson and A. Rasmuson, Drying Technot., 20 1427 (2002) https://doi.org/10.1081/DRT-120005860
  5. S. Prachayawarakom, S. Soponronnarit, S. Wetchacama, and D. Jaisut, Drying Technot., 20, 669 (2002) https://doi.org/10.1081/DRT-120002823
  6. H. C. VanDeventer, AppUed ThermaI Engineering, 17, 1035(1997) https://doi.org/10.1016/S1359-4311(97)00042-2
  7. W. K. Cui, W. J. M. Douglas, and A. S. Mujumdar, Drying Technol, 3, 307 (1985) https://doi.org/10.1080/07373938508916272
  8. G. Heidean and H. J. Berndt, Melliand Textilber., 57, 485 (1976)
  9. L. Han, T. Wakida, and T. Takagishi, Text. Res. J., 57, 519 (1987) https://doi.org/10.1177/004051758705700905
  10. H. C. Karakas, Ph. D. Dissertation, Istanbul Technical University, Istanbul, 1999
  11. ASTM Standard, D2259 - Standard Test Method for Shrinkage of yams
  12. L. E. Alexander, 'X-Ray Diffraction Methods in Polymer Science', Wiley-Interscience, New York, 1969
  13. W. O. Statton, J. PoIym. Sci., Part A-2, Potym. Phys., 10, 1587 (1972) https://doi.org/10.1002/pol.1972.160100815
  14. W. O. Statton, J. L. Koenig, and M. Hannon, J. AppI. Phys., 41, 4290 (1970) https://doi.org/10.1063/1.1658459
  15. F. Pujimoto and M. Yamashita, J. Text. Mach. Soc. Jpn., 4, 124(1971)
  16. H. Ludewig, 'Polyesterfasem', English Edition, Inter- science, New York, 1971
  17. A. Ziabacki, 'Fundamentals of Fiber Formation', John Wiley and Sons, New York, 1976
  18. A. S. Abhiraman, J. Potym. Sci., Part B, PoIm. Phys., 21, 583 (1983)
  19. J. Elad and J. W. Schultz, J. Polym. Sci., Part B, Polym. Phys., 22,781 (1984) https://doi.org/10.1002/pol.1984.180220501
  20. H. W. Peters and T. R. White, J. Soc. Dyers Cotour., 77, 601 (1961)