대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

열공압 방식의 Polydimethylsiloxane 마이크로 밸브의 제작 및 특성

Fabrication and Characteristics of Thermopneumatic-Actuated Polydimethylsiloxane Microvalve

  • 발행 : 2004.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A normally open thermopneumaticc-actuated microvalve has been fabricated and their properties are investigated. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using polydimethylsiloxane (PDMS) and indium tin oxide (ITO) glass. The fabricated microvalves with in-channel configuration are easily integrated with other microfluidic devices on the same substrate. The fabrication process of thermopneumatic-actuated microvalvesusing PDMS is very simple and its performance is very suitable for a disposable lab-on-a-chip. The PDMS membrane deflection increases and the flow rates of the microchannel with microvalvels decrease as the applied power to the ITO heater increases. The powers at flow-off are dependent on the membrane thickness and the applied inlet pressure but are independent of the channel width of microvalves. The flow rate is well controlled by the switching function of ITO heater and the closing/opening times are around 20 sec and 25 sec, respectively.

키워드

참고문헌

  1. David C. Roberts, Hanqing Li, J. Lodewyk Steyn, Onnik Yaglioglu, S. Mark Spearing, Martin A Schmidt, and Nesbitt W. Hagood, 'A Piezoelectric Microvalve for Compact High-Frequency, High-Differential Pressure Hydraulic Micropumping Systems,' Journal of Microelectromechanical System, vol.12, pp.81-92, 2003 https://doi.org/10.1109/JMEMS.2002.807471
  2. Mircea Capanu, James G. Boyd, and Peter J. Hesketh, 'Design, Fabrication, and Testing of a Bistable Electromagnetically Actuated Microvalve,' Journal of Microelectromechanical System, vol.9, pp.181-189, 2000 https://doi.org/10.1109/84.846698
  3. Nelsimar Vandelli, Donald Wroblewski, Margo Velonis, and Thomas Bifano, 'Development of a MEMS Microvale Array for Fluid Flow Control,' Journal of Microelectromechanical System, vol.7, pp.395-403, 1998 https://doi.org/10.1109/84.735347
  4. Kazuo Hosokawa and Ryutaro Maeda, 'Low-Cost Technology for High-Density Microvalve Arrays Using Polydimethylsiloxane(PDMS),' The 14th IEEE International Conference on Micro Electro Mechanical System, MEMS 2001, pp.531-534 https://doi.org/10.1109/MEMSYS.2001.906596
  5. Hidekuni Takao, Makoto Ishida, and Kazuaki Sawada, 'A Pneumatically Actuated Full In-Channel Microvalve With MOSFET-Like Function in Fluid Channel Networks,' Journal of Microelectromechanical System, vol.11, pp.421-426, 2002 https://doi.org/10.1109/JMEMS.2002.803414
  6. Xing Yang, Charles Grosjean, and Yu-Chong Tai, 'Design, Fabrication, and Testing of Micromachined Silicone Rubber Membrane Valves,' Journal of Microelectromechanical System, vol.8, pp.393-402, 1992 https://doi.org/10.1109/84.809053
  7. Hidekuni Takao, Kazuhiro Miyamura, Hiroyuki Ebi, Mitsuaki Ashiki, Kazuaki Sawada, and Makoto Ishida, 'A Thermo-pneumatic In-channel Microvalve With PDMS Diaphragm for Integrated Blood Examination System on Silicon,' The 12th International Conference on Solid State Sensors, Actyators and Microsystems, TRANSDUCERS'03, pp.139-142
  8. P. Selvaganapathy, E.T. Carlen, and C.H. Mastrangelo, 'Electrothermally actuated inline microfluidic valve,' Sensors and Actuators A : Physical, vol.104, pp.275-282, 2003 https://doi.org/10.1016/S0924-4247(03)00030-X
  9. Byubg-Ho Jo, Linda M. Van Lerberghe, Kathleen M. Motsegood, and David J. Beebe, 'Three Dimensional Micro-Channel Fabrication in Polydimthylsiloxane(PDMS) Elastomer,' Journal of Microelectromechanical System, vol.9, pp. 76-81, 2000 https://doi.org/10.1109/84.825780