References
- Abramowicz, W. (1994). Cmsh resistance of T, Y, and Xsections. Technicat Report 24, Department of Ocean Engineering, MIT, Cambridge, MA-02139, U.S.A
- Bastawros, A-R, Bart-smith, H. and Evans, A. G. (2000). Expehmental analysis of deformation mechanisms in a closed-cell aluminium alloy foam. J. the Mechanics and Physics of SoIids, 48, 301-322 https://doi.org/10.1016/S0022-5096(99)00035-6
- Baumeister, J., Banhart, J. and Weber, M. (1997). Aluminium foams for transport industry. Materiats & Design, 18, 217-220 https://doi.org/10.1016/S0261-3069(97)00050-2
- Deshpande, V. S. and Fleck, N. A. (2000). High strain rate compressive behaviour of aluminium alloy foams. Int. J. Impact Eneineerins, 24, 277-298 https://doi.org/10.1016/S0734-743X(99)00153-0
- Ford, C. M. and Gibson, L. J. (1998). uniaxial strength asymmetry in cellular materials: An analytical model.Int. J. Mechanicat Science, 40, 521-31 https://doi.org/10.1016/S0020-7403(97)00064-7
- Fortes, M. A., Colaco, R. and Vaz, M. F. (1999). The contact mechanics of cellular solids. Wear, 99, 2301-2310
- Gibson, L. J. and Ashby, M. F. (1998). Cettutar Sotids. Pergamon Press. Oxford, England
- Grenestedt, J. L. (1998). Influence of wavy imper-fections in cell walls on elastic stiffness of cellular solids. J. the Mechanics and Physics of Solids, 45, 29-50
- Gutierrez, M. A. and Borst, R. D. (2000). Stochastic aspects of localized failure: material and boundary imperfections, Int. J. SoIids and Structures, 37, 7145-7159. https://doi.org/10.1016/S0020-7683(00)00193-1
- Hanssen, A. G., Langseth, M. and Hopperstad, O. S.(1996). Static cmshing of square aluminium extrusions with aluminium foam filler, Int. J. Impact Ensineering, 18, 949-968 https://doi.org/10.1016/S0734-743X(96)00025-5
- Hanssen, A. G., Langseth, M. and Hopperstad, O. S.(2000). Static and dynamic crushing of square aluminium extrusions with aluminium foam filler, Int. J. Impact Ensineerine, 24, 347-383 https://doi.org/10.1016/S0734-743X(99)00169-4
- Harte, A. M., Fleck, N. A. and Ashby, M. F. (1999). Fatigue failure of an open cell and a closed cell aluminium alloy foam. Acta Materiatia, 47, 2511-2524 https://doi.org/10.1016/S1359-6454(99)00097-X
-
Huck
$\check{c}$ Ko, B. and Faria, L. (1997). Material model of metallic cellular solids, Computers & Structures, 62, 1049-1057 https://doi.org/10.1016/S0045-7949(96)00310-0 - Huh. H. and Kang, W. J. (2002). Crash-worthiness assessment of thin-walled structures with the high-strength steel sheet, Int. J. VehicIe Design, 30, 1-21 https://doi.org/10.1504/IJVD.2002.002022
- Lee, D. G. and Cheon, S. S. (2001). Impact Characteri-sties of glass fiber composites with respect to fiber volume fraction. J. of Composite Materiats, 35,27-56 https://doi.org/10.1177/002199801772661858
- Meguid, S. A., Cheon, S. S. and Abbasi, N-El (2002). FE modelling of deformation localization in metallic foams. Finite Etements in Anatysis and Desien, 38, 631-643 https://doi.org/10.1016/S0168-874X(01)00096-8
- Meguid, S. A. and Xue, H. (2000). On the use of 'SDDIS' for measuring deformation localization in cellular materials, Proceedings of the third Inter-national Conference on Mechanics and Materiats in Desien. Orlando, U.S.A. 187
- Mierlo, J. V., Vereecken, L., Maggetto, G., Favrel, V., Meyer, S. and Hecq, W. (2003). How to define clean vehicles? Environmental impact rating of vehicles, Int. J. Automotive Technotogy, 4, 2, 77-86
- Miller, R. E. (2000). A continuum plasticity model forthe constitutive and indentation behaviour of foamed metals, Int. J. Mechanicat Science, 42, 729-754 https://doi.org/10.1016/S0020-7403(99)00021-1
- Overaker, D. W., Cuitino, A. M, and Langrana, N. A.(1998). Effects of morphology and orientation on the behavior of two-dimensional hexagonal foams and application in a re-entrant foam anchor model. Mechanics of MateriaIs, 29, 43-52 https://doi.org/10.1016/S0167-6636(98)00004-0
- Paul, A., Seshacharyulu, T. and Ramanurty, U. (1999). Tensile strength of a closed-cell al foam in the presence of notches and holes. Scripta Materiatia, 40, 809-814 https://doi.org/10.1016/S1359-6462(99)00037-8
- Santosa, S. and Wierzbicki, T. (1998). Crash behavior of columns filled with aluminum honeycomb or foam.Computers and Structures, 68, 343-367 https://doi.org/10.1016/S0045-7949(98)00067-4
- Santosa, S. and Wierzbicki, T. (1998). On the modeling of cmsh behavior of a closed-cell aluminium foam structures. J. the Mechanics and Physics of Solids, 46, 645-669 https://doi.org/10.1016/S0022-5096(97)00082-3
- Schey, J. A. (1987) Introduction to Manufacturing Processes. McGraw-Hill. New York
- Spiegel, M. R. (1968). Mathematicat Handbook of Formutas and Tabtes. McGraw-Hill. New York.
- Sugimura, Y., Meyer, J., He, M. Y, Bart-smith, H.,Grenestedt, J. L. and Evans A G. (1997). On the mechanical performance of closed cell al alloy foams. Acta MateriaIia, 45, 5245-5259. https://doi.org/10.1016/S1359-6454(97)00148-1