Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Modal Characteristic Optimization of Rotating Cantilever Beams via Shape Variation of Cross-section by Multi-stage Spline Function

다단 Spline 곡선에 의한 단면형상 변화를 통한 회전 외팔보의 진동특성 최적화

  • 조정은 (한양대학교 대학원 기계설계학과) ;
  • 유홍희 (한양대학교 기계공학부)
  • Published : 2004.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

When structures undergo rotating motion, their modal characteristics often vary significantly. The variations of modal characteristics are determined from their geometric shapes and their rotating angular speed. Since the modal characteristics vary during the operation of the structures, they should be carefully scrutinized. In this paper, rotating cantilever beams are chosen as design targets which need to meet some specific design requirements. The thickness and the width of the rotating beams are assumed as multi-stage spline functions and the stage values for the thickness and the width are used as design variables for the optimization problems.

Keywords

References

  1. Southwell, R. and Gough, F., 1921. "The Free Transverse Vibration of Airscrew Blades," British A. R. C. Reports and Memoranda No. 766.
  2. Yntema, R., 1955. "Simplified Procedures and Charts for the Rapid Estimation of Bending Frequencies of Rotating Beams," NACA 3459.
  3. Schilhansl, M., 1958. "Bending Frequency of a Rotating Cantilever Beam," J. of Appl. Mech. Trans. Am. Soc. Mech. Engrs, Vol. 25, pp. 28-30.
  4. Carnegie, W., 1959. "Vibrations of Rotating Cantilever Blading: Theoretical Approaches to the Frequency Problem Based on Energy Methods," J. of Mechanical Engineering Sci., Vol. 1, pp. 235-240. https://doi.org/10.1243/JMES_JOUR_1959_001_028_02
  5. Putter, S. and Manor, H., 1978. "Natural Frequencies of Radial Rotating Beams," J. of Sound and Vibration, Vol. 56, pp. 175-185. https://doi.org/10.1016/S0022-460X(78)80013-3
  6. Kane, T., Ryan, R. and Banerjee, A., 1987. "Dynamics of Cantilever Beam Attached to a Moving Base," J. of Guidance. Control. and Dynamics, Vol. 10, pp. 139-151. https://doi.org/10.2514/3.20195
  7. Yoo, H., Ryan, R. and Scott, R., 1995. "Dynamics of Flexible Beams Undergoing Overall Motions," J. of Sound and Vibration, Vol. 181(2), pp. 261-278. https://doi.org/10.1006/jsvi.1995.0139
  8. 신상하, 유홍희. 1996. "전단 및 단면 관성 효과를 고려한 회전 외팔보의 모델링 및 진동해석," 한국소음진동공학회논문집, 제6권, 제2호, pp. 179-186.
  9. Yoo, H. and Shin, S., 1998. "Vibration Analysis Rotating Cantilever Beams," J. of Sound and Vibration, Vol. 212, No. 5, pp. 807-828. https://doi.org/10.1006/jsvi.1997.1469
  10. Yoo, H., Seo, S. and Huh, K., 2002. "The effect of a concentrated masson the modal characteristics of a rotation cantilever beam," J. of Mechanical Engineering Science, Vol. 216, Part C, pp. 151-163. https://doi.org/10.1243/095440802320225293
  11. Yoo, H., 1995. "Flapwise Bending Vibration of Rotating Cantilever Beams," Transactions of the KSME, A. Vol. 19, No. 2, pp. 348-353.
  12. Yun, Y. and Yoo, H., 2001. "Shape Optimization of a Rotating Cantilever Beam Considering its Modal and Stress Characteristics," Transactions of the KSME, A. Vol. 25, No. 4, pp. 645-653.
  13. Kane, T. and Levinson, D., 1985. Dynamics: Theory and Applications, New York: McGraw-Hill Book Company.
  14. Arora, J., 1989. Introduction To Optimum Design, New York: McGraw-Hill Book Company.
  15. DOT user manual, Vanderplaates Research and Development, Inc., 1995.