Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Exact Solutions for Vibration and Buckling of An SS-C-SS-C Rectangular Plate Loaded by Linearly Varying In-plane Stresse

등변분포 평면응력을 받는 SS-C-SS-C 직사각형 판의 진동과 좌굴의 엄밀해

  • 강재훈 (중앙대학교(서울캠퍼스) 공과대학 건축학부) ;
  • 심현주 (중앙대학교(서울캠퍼스) 대학원 건축학과) ;
  • 장경호 (중앙대학교(서울캠퍼스) 건설환경공학과)
  • Published : 2004.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Exact solutions are presented for the free vibration and buckling of rectangular plates haying two opposite edges ( x=0 and a) simply supported and the other two ( y=0 and b) clamped, with the simply supported edges subjected to a linearly varying normal stress $\sigma$$_{x}$=- $N_{0}$[1-a(y/b)]/h, where h is the plate thickness. By assuming the transverse displacement ( w) to vary as sin(m$\pi$x/a), the governing partial differential equation of motion is reduced to an ordinary differential equation in y with variable coefficients. for which an exact solution is obtained as a power series (the method of Frobenius). Applying the clamped boundary conditions at y=0 and byields the frequency determinant. Buckling loads arise as the frequencies approach zero. A careful study of the convergence of the power series is made. Buckling loads are determined for loading parameters a= 0, 0.5, 1, 1.5. 2, for which a=2 is a pure in-plane bending moment. Comparisons are made with published buckling loads for a= 0, 1, 2 obtained by the method of integration of the differential equation (a=0) or the method of energy (a=1, 2). Novel results are presented for the free vibration frequencies of rectangular plates with aspect ratios a/b =0.5, 1, 2 when a=2, with load intensities $N_{0}$ / $N_{cr}$ =0, 0.5, 0.8, 0.95, 1. where $N_{cr}$ is the critical buckling load of the plate. Contour plots of buckling and free vibration mode shapes ate also shown.shown.

Keywords

References

  1. Leissa, A. W., 1969. Vibration of Plates, Washington D.C. U.S. Govt. Printing Office, Reprinted 1993. by The Acoustical Society of America.
  2. Leissa, A. W., 1973. "The Free Vibration of Rectangular Plates," Journal of Sound Vibration, Vol. 31, No. 3, pp. 257-293. https://doi.org/10.1016/S0022-460X(73)80371-2
  3. Dickinson, S. M., 1971. "Lateral Vibration of Rectangular Plates Subject to In-plane Forces," Journal of Sound and Vibration, Vol. 16, No. 3, pp. 465-472. https://doi.org/10.1016/0022-460X(71)90656-0
  4. Bassily, S. F. and Dicknson, S. M., 1972. "Buckling and lateral Vibration of Rectangular Plates Subject to In-plane Loads a Ritz Approach," Vol. 22, No. 2, pp. 219-239.
  5. Dickinson, S. M., 1978. "The Buckling and Frequency of Flexural Vibration of Rectangular Isotropic and Orthotropic Plates Using Payleigh's Method," Vol. 61, No. 1, pp. 1-8. https://doi.org/10.1016/0022-460X(78)90036-6
  6. Bassily, S. F. and Dickinson, S. M., 1978. "Buckling and Vibration of In-Plane Loaded Plates Trated by a Unified Ritz Approach," Vol. 59, No. 1, pp. 1-14. https://doi.org/10.1016/0022-460X(78)90473-X
  7. Kaldas, M. M. and Dickinson, S. M., 1981. "Vibration and Bucking Calculations for Rectangular Plates Subject to Complicated In-plane Stress Distributions by Using Numerical Intergration in a Raylkeigh-ritz Analysis," Vol. 75, No. 2, pp. 151-162. https://doi.org/10.1016/0022-460X(81)90336-9
  8. Ilanko, S. and Tillman, S. C., 1985. "The Natural Frequencies on In-plate Stressed Rectangular Plates," Vol. 98, No. 1, pp. 25-34. https://doi.org/10.1016/0022-460X(85)90399-2
  9. Singh, J. P. and Dey, S. S., 1990. "Transverse Vibration of Rectangular Plates Subjected to In-plane Forces by a Difference Based Variational Approach," Vol. 32, No. 7, pp. 591-599. https://doi.org/10.1016/0020-7403(90)90104-Q
  10. Laura, P. A. A., Larrondo, H. A., Cortinez, V. H. and Avalos, D. R., 1991. "Transverse Vibrations of Rectangular Plates of Non-Uniform Thickness Subjected to a Uniform State of In-plane Stress," Vol. 151, No. 1, pp. 175-180. https://doi.org/10.1016/0022-460X(91)90662-4
  11. Timoshenko, S. and Gere, J., 1963. Theory of Elastic Stability, 2nd Ed., New York, McGraw-Hill Book Company, Inc.
  12. Bulson, P., 1970. The Stabilty of Flat Plates, London, Chatto & Windus.
  13. Japan Column Research Council, 1971. Handbook of Structual Stability, Tokyo, Corona Publishing Company.
  14. Nlke, K., 1936. "Biegungs-Beulung der Rechteck-platte mit Eingespanter Lngsrndern," Bauingineur, Vol. 17, p. 111.
  15. Nlke, K., 1937. "Biegungsbeulung der Rechteck-platte," Ingineur Archiv, Vol. 8, p. 403. https://doi.org/10.1007/BF02086022
  16. Timoshenko, S., 1907. Bull. Polytech. Inst. Kiev.
  17. Timoshenko, S., Z. 1910. Math. Physik, Vol. 58, p. 343.
  18. Wylie, Jr. C. R., 1951. Advanced Engineering Mathe-matics, New York, McGraw-Hill Book Company, Inc