Abstract
This paper presents the parallel distributed control scheme for shaping of the bent glass. The designed system consists of a PC, a main controller and 11 servo-controllers, the precision motion controllers. Each elements are connected by using RS-232C and 8-bit data bus. In order to guarantee the stability and the control performance, we use a precision PID motion controller and a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator. The main controller provides the control instructions and parameter values to 11 servo-controllers by chip enable signal, simultaneously. Using the received commands and parameter values, the servo-controllers control the positions of the DC motors based on PID control scheme.
본 논문에서는 병렬 분산제어 방식을 이용한 곡면유리 자동성형 시스템을 개발한다. 설계된 시스템은 PC, 하나의 주제어기, 그리고 11개의 서보제어기로 구성된다. 각 요소들은 RS-232C와 8비트 데이터 버스로 연결된다. 안정성과 제어성능을 고려하여 정밀 PID 모션제어기 프로세서와 DC모터 제어에 사용되는 H-브리지를 사용한다. 설계된 시스템에서, PC는 주어진 곡률반경에 대한 각 구조물의 위치 값을 계산하고 이 값에 대응하는 모터 회전 데이터를 계산하며 작업자의 조작 입력을 위한 사용자 인터페이스를 제공한다. 주제어기는 PC로부터 동작 명령과 제어 파라미터를 받아 버스 통신방식을 이용하여 이를 각 서보제어기로 전달하며 서보제어기는 주제어기로부터 넘겨받은 동작명령과 제어 파라미터를 이용하여 각 모터에 대하여 PID제어를 수행한다.