A Study on How Cyclic Casting of Base Metal Alloy for Dental Ceramic Crown May Effects upon Its Mechanical Properties and Microstructure

치과 도재용착 주조관용 비귀금속 합금의 반복주조가 기계적 특성 및 미세조직에 미치는 영향

  • Choi, Un-Jae (Dept. of Dental Laboratory Technology, Wonkwang Health Science College) ;
  • Shin, Moo-Hak (Dept. of Dental Laboratory Technology, Wonkwang Health Science College) ;
  • Chung, Hee-Sun (Dept. of Dental Laboratory Technology, Wonkwang Health Science College) ;
  • Koh, Myoung-Won (Dept. of Dental Laboratory Technology, Wonkwang Health Science College)
  • 최운재 (원광보건대학 치기공과) ;
  • 신무학 (원광보건대학 치기공과) ;
  • 정희선 (원광보건대학 치기공과) ;
  • 고명원 (원광보건대학 치기공과)
  • Published : 2003.07.12

Abstract

Using a nickel-chrome casting alloy called 'Rexillium V' which is also available as base metal alloy for dental ceramic crown, 4 types of mixtures(A, B, C, D) with old and new metal were prepared for cyclic casting. The results of cyclic casting can be outlined as follows: 1. For Vickers hardness after casting, specimen A and D tended to have lower hardness in the course of cyclic casting, while specimen B and C tended to higher hardness. 2. The results of X-ray diffraction analysis showed that major crystal phase contained nickelchrome compounds and carbide. 3. The observation results of SEM photographs after cyclic casting show that there was a significant tendency to have similar structures among experimental groups. 4. The results of EDX analysis after cyclic casting showed that there were little differences in chemical composition between parent metal and base metal alloy. Although industrial nickel-chrome cast alloy did not show any significant change in material properties even through cyclic casting over several times, it is recommended that more there be more in-depth studies on how to detect any potential corrosion, discoloration and toxication of dental ceramic crown implanted in patient's oral cavity.

Keywords