대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제27권9호
  • /
  • Pages.1299-1308
  • /
  • 2003
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Gun식 가스버너의 난류유동장 발달에 미치는 슬릿과 스월베인의 영향

The Effect of Slits and Swirl Vanes on the Development of Turbulent Flow Fields in Gun-Type Gas Burner

  • 발행 : 2003.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper is studied to investigate the effect of slits and swirl vanes on the development of turbulent flow fields in gun-type gas burner with a cone type baffle plate because this gas burner is generally composed of eight slits and swirl vanes. All of turbulent characteristics including mean velocities were measured in the horizontal plane and cross section by using X-type hot-wire probe from hot-wire anemometer system. This experiment is carried out at flow rate 450 l/min in the test section of subsonic wind tunnel. Slits cause the fast jets, and then they have the characteristic that the flow is not adequately spread to radial direction and has long flow length and very small flow velocity distribution in the central part. On the contrary, swirl vanes does not have long enough for adequate flow length to downstream because the rotational flow diffuses remarkably to radial direction. However, the suitable arrangement between slits and swirl vanes causes effective flow width and flow length, and then it promotes fast flow mixing over the entire region including central part to increase turbulence more largely and effectively. Therefore, it is thought as a very desirable design method in gun-type gas burner to locate slits on the outside of swirl vanes.

키워드

참고문헌

  1. Shioji, M., Kim, I. S., Ikegami, M. and Murakami, K., 1998, 'Flame Stability and NOx Formation in a High-Intensity Swirl Burner,' Transactions of JSME (Part B), Vol. 64, No. 621, pp. 222-227
  2. Hibara, H. and Sudou, K., 1999, 'Swirling Jet along a Solid Surface,' Transactions of JSME (Part B), Vol. 65, No. 629, pp. 130-137 https://doi.org/10.1299/kikaib.65.130
  3. Lefebvre, A. H., 1983, Gas Turbine Combustion, pp. 126-135
  4. Beer, J. M. and Chigier, N. A., 1972, Combustion Aerodynamics, John Wiley & Sons, pp. 102-104
  5. Syred, N. and Beer, J. M., 1974, 'Combustion in Swirling Flows : A Review,' Combustion and Flame, Vol. 23, pp. 143-201 https://doi.org/10.1016/0010-2180(74)90057-1
  6. Froud, D., O'doherty, T. and Syred, N., 1995, 'Phase Averaging of the Precessing Vortex Core in a Swirl Burner under Piloted and Premixed Combustion Conditions,' Combustion and Flame, Vol. 100, pp. 407-412 https://doi.org/10.1016/0010-2180(94)00167-Q
  7. Tsao, J. M. and Lin, C. A., 1999, 'Reynolds Stress Modelling of Jet and Swirl Interaction Inside a Gas Turbine Combustor,' Int. J. for Numerical Methods in Fluids, Vol. 29, pp. 451-464 https://doi.org/10.1002/(SICI)1097-0363(19990228)29:4<451::AID-FLD796>3.0.CO;2-X
  8. Gupta, A. K., Lilley, D. G. and Syred, N., 1984, Swirl Flows, Abacus Press, Tunbridge, England
  9. Leuckel, I. W. and Fricker, N., 1976, 'The Characteristics of Swirl-Stabilized Natural Gas Flames,' J. Inst. Fuel, Vol. 49, pp. 103
  10. Chen, R. H. and Driscoll, J. F., 1988, 'The Role of Recirculation Vortex in Improving Fuel-Air Mixing Within Swirling Flames,' 22nd Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, pp. 531-540
  11. Gupta, A. K., Beer, J. M. and Swithenbank, J., 1976, 'Concentric Multi-Annular Swirl Burners: Stability Limits and Emission Characteristics,' Sixteenth Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, pp. 79-91
  12. Kim, J. K., 2001, 'Investigation of the Three-Dimensional Turbulent Flow Fields of the Gas Swirl Burner with a Cone Type Baffle Plate(II),' KSME International Journal, Vol. 15, No. 7, pp. 906-920 https://doi.org/10.1007/BF03185269
  13. Kim, J. K., 2001, 'Investigation of the Three-Dimensional Turbulent Flow Fields of the Gas Swirl Burner with a Cone Type Baffle Plate(I),' KSME International Journal, Vol. 15, No. 7, pp. 895-905 https://doi.org/10.1007/BF03185268
  14. Kim, J. K., 2001, 'An Experimental Study on Three Dimensional Turbulent Flow Characteristics of Swirl Burner for Gas Furnace,' Transactions of the KSME (Part B), Vol. 25, No. 2, pp. 225-234
  15. Kim, J. K. and Jeong, K. J., 2003, 'The Role of Slits and Swirl Vanes on the Turbulent Flow Fields in Gun-Type Gas Burner with a Cone-Type Baffle Plate,' Transactions of the KSME (Part B), Vol. 27, No. 4, pp. 466-475
  16. Bruun, H. H., 1996, Hot-Wire Anemometry, Oxford Science Publications, pp. 132-163
  17. Dantec, Streamline User's Reference Manual, Chapter 8.3 Algorithms
  18. Gursul, I., 1996, 'Effect of Nonaxisymmetric Forcing on a Swirling Jet With Vortex Breakdown,' Transactions of ASME (J. of Fluids Eng.), Vol. 118, pp. 316-323 https://doi.org/10.1115/1.2817379