유동층에서 dry sorbent를 이용한 CO2 제어에 관한 연구

Study on Carbon Dioxide Control by Using Dry Sorbent in Fludized Bed

  • 이상섭 (부산대학교 환경공학과) ;
  • 김민철 (부산대학교 환경공학과) ;
  • 유정석 (두산중공업주식회사 기술연구원) ;
  • 문길호 (두산중공업주식회사 기술연구원) ;
  • 오광중 (부산대학교 환경공학과)
  • Lee, Sang-Sup (Department of Environmental Engineering, Pusan National University) ;
  • Kim, Min-Choul (Department of Environmental Engineering, Pusan National University) ;
  • Yoo, Jeong-Seok (Doosan Heavy Industries & Construction Com. Ltd. R&D Center) ;
  • Moon, Gil-Ho (Doosan Heavy Industries & Construction Com. Ltd. R&D Center) ;
  • Oh, Kwang-Joong (Department of Environmental Engineering, Pusan National University)
  • 투고 : 2003.10.21
  • 심사 : 2003.11.21
  • 발행 : 2003.12.01

초록

건식 흡착제를 이용한 유동층 공정에 관한 기술은 이산화탄소 처리 비용을 철강하고 효율적으로 운전될 수 있는 신기술이라고 할 수 있다. 따라서, 본 연구에서는 유동층 공정에서 건식 흡착제를 사용할 때 조업변수에 따른 이산화탄소 제어에 대해 살펴보고, 이산화탄소 흡착능과 압력강하에 대해서 고정층 공정과 비교하였으며, 활성탄, 활성 알루미나, 분자체 5A, 분자체 13X의 이산화탄소 흡착능을 각각 살펴보았다. 연구 결과, 유동층 공정의 운전을 위한 기초자료를 얻을 수 있었고, 유속이 증가할수록 유동층 공정은 상대적으로 높은 이산화탄소 흡착능과 낮은 압력강하를 지니는 것으로 나타났다. 그리고, 분자체 5A는 다른 건식 흡착제들보다 1.1~3.0배 파괴점이 늦게 나타났으며, 1.1~2.7배 높은 흡착능을 보였다.

The technology of fluidized bed to use dry sorbent can be new technology that reduce the operating cost and make efficient operation. Therefore, this study investigated $CO_2$ control by dry sorbents with operating variables in a fluidized bed, compared with fixed bed for $CO_2$ adsorption capacity and pressure drop, and presented the $CO_2$ adsorption capacity of activated carbon, molecular sieve 5A, molecular sieve 13X, and activated alumina. As the results of this study, the basic data could be achieved for operation of fluidized bed process, and fluidized bed process presented relatively high $CO_2$ adsorption capacity and low pressure drop with the increase of gas velocity. In addition, molecular sieve 5A showed 1.1~3.0-fold later breakthrough point and 1.1~2.7-fold higher adsorption capacity than the other dry sorbents.

키워드