DOI QR코드

DOI QR Code

Design procedure for modal controllers for defective and nearly defective systems

  • Chen, Yu Dong (Department of Mechanics, Jilin University, Nanling Campus) ;
  • Chen, Su Huan (Department of Mechanics, Jilin University, Nanling Campus) ;
  • Yang, Guang (Department of Basic Sciences, Changchun University of Technology)
  • 투고 : 2002.05.17
  • 심사 : 2003.03.07
  • 발행 : 2003.05.25

초록

This paper presents a procedure for designing feedback controllers for defective systems with repeated eigenvalues, and also for a nearly defective system with close eigenvalues. For the nearly defective system, we first transform it into a defective one, and then apply the same method to deal with the nearly defective system. A method for computing the gain matrices is discussed here. The methodologies proposed are based on the modal coordinate equation to avoid the tedious mathematical manipulation. As an application of the present procedure, a numerical example is given.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China

참고문헌

  1. Andry, A.N., Shapiro, E.Y. and Chung, J.C. (1983), "Eigenvalue assignment for linear systems", IEEE Transactions on Aerospace and Electronic Systems, 19(5), 711-729.
  2. Chen, S.H. (1999), Matrix Perturbation Theory in Structural Dynamic Design (in Chinese), Science Press, Beijing.
  3. Chen, Y.D., Chen, S.H. and Liu, Z.S. (2001), "Modal optimal control procedure for near defective systems", J. Sound Vib., 245(1), 113-132. https://doi.org/10.1006/jsvi.2000.3481
  4. Chen, Y.D., Chen, S.H. and Liu, Z.S. (2001), "Quantitative measurements of modal controllability and observability in vibration control of defective and nearly defective systems", J. Sound Vib., 248(3), 413-426. https://doi.org/10.1006/jsvi.2000.3826
  5. Deif, A.S. (1982), Advanced Matrix Theory for Scientist and Engineers, Abacus House, England.
  6. Kimura, H. (1977), "A further result on the problem of pole assignment by output feedback", IEEE Transactions on Automatic Control, 22(3), 458-463. https://doi.org/10.1109/TAC.1977.1101520
  7. Liu, Z.S., Wang, D.J., Hu, H.C. and Yu, M. (1994), "Measure of modal controllability and observability in vibration control of flexible structures", Journal of Guidance, Control and Dynamics, 17(6), 1377-1380. https://doi.org/10.2514/3.21363
  8. Maghami, P.G. and Juang, J.-N. (1990), "Efficient eigenvalue assignment for large space structures", Journal of Guidance, Control, and Dynamics, 13(6), 1033-1039. https://doi.org/10.2514/3.20576
  9. Maghami, P. and Gupta, S. (1997), "Design of constant gains dissipative controllers for eigensystem assignment in passive systems", Journal of Guidance, Control, and Dynamics, 20(4), 648-657. https://doi.org/10.2514/2.4127
  10. Meirovitch, L. (1990), Dynamics and Control, Wiley, New York.
  11. Prattichizzo, D. and Bicchi, A. (1997), "Consistent task specification for manipulation systems with general kinematics", Journal of Dynamic Systems Measurement and Control, Transaction of the ASME, 119(4), 760-767. https://doi.org/10.1115/1.2802388
  12. Prattichizzo, D. and Bicchi, A. (1998), "Dynamic analysis of mobility and graspability of general manipulation systems", IEEE Transations on Robotics and Automation APR, 14(2), 241-258. https://doi.org/10.1109/70.681243
  13. Shi, G.Q. and Zhu, D.C. (1989), "Generalized modal theory for linear vibration defective systems (in Chinese)", ACTA Mechanica Sinica, 21(2), 212-217.
  14. Srinathkumar, S. (1978), "Eigenvalue/eigenvector assignment using output feedback", IEEE Transactions on Automatic Control, 23(1), 79-81. https://doi.org/10.1109/TAC.1978.1101685
  15. Xu, T. and Chen, S.H. (1994), "Perturbation sensitivity of generalized modes of defective systems", Comput. Struct., 52(2), 1377-1380.

피인용 문헌

  1. Multi-stage design procedure for modal controllers of multi-input defective systems vol.27, pp.5, 2007, https://doi.org/10.12989/sem.2007.27.5.527
  2. Active control of a structure with continuously closely spaced natural frequencies vol.294, pp.1-2, 2006, https://doi.org/10.1016/j.jsv.2005.10.006