Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

The Safety Study on High Tension Bolted Splice by Sliding and Plastic Analysis

고장력볼트 연결부의 미끄럼 및 소성해석에 의한 안전도 연구

  • Bang, Myung-Seok (Department of Safety Engineering, Chung-Ju National University)
  • 방명석 (충주대학교 안전공학과)
  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study is proposed the advanced elasto-plastic analytical method which can identify complex structural behaviors on the splice part of steel structures such as sliding and plastic contact problem between splice plates and blots. Compliated boundary conditions and various manufacturing defects are considered in various analytical cases. In the design or repair phase the plastic behavior and ultimate strength of splice parts should be very carefully verified to extend the service life of steel structures.

Keywords

References

  1. 박용명, 성택룡, '내후성강재 고장력볼트 이음부미끄럼계수 평가 실험(I,II)', 한국강구조학회논문집, 제12권, 제2호, pp. 167-175, 2000
  2. 송준혁, 김종규, 강희용, 양성모, '체결력에 따른 볼트 결합부의 접촉응력분포계수 평가', 한국공작기계학회지, 제8권, 제2호, pp. 73-79, 1999
  3. 김성훈, 이승용, 최준혁, 장동일, '고장력볼트 이음부의 내부 압축웅력 분포', 한국강구조학회논문집, 제9권, 제2호, pp. 171-179, 1997
  4. H. D. Hibbit, P. V. Marcal and J. R. Rice, 'A Finite Element Fonnulation for Problem of Large Strain and Large Deformation', Int. J. Solids Struct., Vol. 6, pp. 1069-1086, 1970 https://doi.org/10.1016/0020-7683(70)90048-X
  5. R. M. McMeeking and J. R. Rice, 'Finite Element Formulations for Problems of Large Elastio Plastic Deformation', Int. J. Solids Struct., Vol. 11, pp. 601-616, 1975 https://doi.org/10.1016/0020-7683(75)90033-5
  6. LUSAS, 'Powerfull FE technology for specialist applications', Ver. 13.4 FEA Ltd., 2002
  7. 건설교통부, '도로교 표준시방서', 1996