초록
원자력발전소의 안전성등급 기기에 적용되는 비파괴검사는 실제 결함을 실현한 시험편을 사용하여 결함탐지능력을 검증하도록 하는 기량검증이 요구되고 있다. 가동중인 원전에서 발생 가능한 균열으로는 기계적 피로균열, 열 피로균열 및 입계부식균열 등이 있으나 본 연구에서는 기계적 피로균열을 대상으로 하였다. 인장 피로하중을 사용하여 기계적 피로결함을 제조하기 위해서 시험편을 설계하였고 원하는 피로결함 파면의 조도를 얻기 위해서 인가하중의 크기 및 사이클 수를 조절하여 피로결함을 발생시켰다. 발생된 결함에 대한 정확한 크기와 위치에 대한 물리적 정보를 얻은 후에 결함이 설계된 크기와 위치에 존재하도록 기밀용접을 실시하였다. 기밀용접 후 잔여 용접 흠은 가스 텅스텐 아크용접 및 플럭스 코어드 아크용접으로 채워졌다. 최종 완성된 피로결함 시험편을 방사선투과검사 및 초음파탐상검사를 통하여 검사한 결과, 설계된 길이와 깊이로 피로결함이 형성되었음을 확인하였다.
Performance demonstration with real flawed specimens has been strongly required for nondestructive evaluation of safety class components in nuclear power plant. Mechanical or thermal fatigue crack and intergranular stress corrosion cracking could be occured in the in-service nuclear power plant and mechanical fatigue crack was selected to study in this paper. Specimen was designed to produce mechanical fatigue flaw under tensile stress. The number of cycles and the level of stress were controlled to obtain the desired flaw roughness. After the accurate physical measurement of the flaw size and location, fracture surface was seal-welded in place to ensure the designed location and site. The remaining weld groove was then filled by using gas-tungsten are welding(GTAW) and flux-cored arc welding(FCAW). Results of radio graphic and ultrasonic testing showed that fatigue cracks were consistent with the designed size and location in the final specimens.