International Journal of Precision Engineering and Manufacturing

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on Determination of Shear Center of Beam with Arbitrary Cross Section

  • Oh, Teak-Yul (School of Mechanical and Industrial Systems Engineering, Kyunghee University) ;
  • Byun, Chang-Hwan (Graduate School of Mechanical Engineering, Kyunghee University) ;
  • Known, Young-Ha (School of Mechanical and Industrial Systems Engineering, Kyunghee University)
  • Published : 2003.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

It is important to find the shear center of beam with arbitrary cross-section in structures. In this study, it is introduced to determine the shear center that gets the equivalent stiffness matrix representing arbitrary cross section of beam and applies concepts of equivalent energy. This method shows the results of applying on examples that the exact and approximate solution of open and cross section of beam is known. The shear center of composite rotor blade by the experiment and by the suggested method was compared in this study.

Keywords

References

  1. Reissner, E., 'A Note on the Shear Center Problem for Shear-Deformable Plates,' Int. J. Solids Structures, Vol. 32, No.5, pp. 679-682, 1994 https://doi.org/10.1016/0020-7683(94)00151-L
  2. Reissner, E., 'The Shear Center Problem for Nonlinear Material Behavior,' Transactions of the ASME, Vol. 62, pp. 822-823, 1995 https://doi.org/10.1115/1.2897024
  3. Kosmatka, J. B., 'General Behavior and Shear Center Location of Prismatic Anisotropic Beams via Power Series,' Int. J. Solids Structures, Vol. 31, No. 3 pp. 417-439,1994 https://doi.org/10.1016/0020-7683(94)90114-7
  4. Wondle, R., 'Calculation of the Cross Section Properties and Shear Stress of Composite Rotor Blade,' Vertica, Vol. 6, 1982
  5. Guyan, R. J., 'Reduction of Stiffness and Mass Matrices,' AIAA Journal, Vol. 3, pp. 380, 1965 https://doi.org/10.2514/3.2874
  6. Irons, B. M., 'Structural Eigenvalue Problems ; elimination of Unwanted Variables,' AIAA Journal, Vol. 3, pp. 961-962, 1965
  7. Wright, G. C., Miles, G. A., 'An Economical Method for Determining the Smallest Eigenvalues of Large Linear Systems,' International Journal for Numerical Methods in Engineering, Vol. 3, pp. 25-33 https://doi.org/10.1002/nme.1620030106
  8. Geradin, M.. 'Error Bounds for Eigenvalue Analysis by Elimination of Variables,' Journal of Sound and Vibration, Vol. 19, pp. 111-132
  9. Joo, J., 'An Experimental Study on the Dynamic Characteristics of a Hingeless Rotor in Hover,' Ph. D. Dissertation, Dept. of Aerospace Engineering, Seoul National University, 1993
  10. Oh, Taek-Yul, Choi, Myung-Jin, Yu, Yong-Seok, Chae, Kyung-Duck, 'Determination of the Principal Directions of Composite Helicopter Rotor Blades with Arbitrary Cross Sections,' KSME International Journal, Vol. 14, No.3, pp. 291-297, 2000 https://doi.org/10.1007/BF03186421
  11. Oh, Taek-Yul, Byun, Chang-Hwan, Yu, Young-Seok, Kwon, Young-Ha, 'A Study on Determination of Shear Center of Beam Having Arbitrary Cross Section,' KSPE Journal, Vol. 19, No. 1, pp. 93-98, 2002
  12. The MacNeal-Schwendler Corporation, MSC/NASTRAN Dynamics Seminar Notes, The MacNeal-Schwendler Corporation, pp. 4-9 - 4-11, 1992
  13. Arthur P. Boresi, Richard J. Schmidt, Omar M. Sidebottom, Advanced Mechanics of Materials, John Wiley & Sons, pp. 331-361, 1993