한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권7호
  • /
  • Pages.78-83
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

마찰력 측정을 통한 GMR 헤드 제작용 초정밀 연마판의 특성화

Characterization of ultra Precision Grinding Plate for GMR Head Manufacturing by Measuring Frictional Force

  • 노병국 (대구가톨릭대학교 기계자동차공학부) ;
  • 김기대 (대구가톨릭대학교 기계자동차공학부)
  • 발행 : 2003.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Characterization of an ultra precision grinding plate for GMR head manufacturing is performed by measuring frictional forces between the grinding plate and the advanced ceramic Two kinds of methods of producing the precision grinding plates are presented: texturing and micro-channeling. Texturing is effective in terms of production time but micro-channeling excels in quality control. It is found that the frictional coefficient of a precision grinding plate decreases as the impregnation of diamond grain onto the precision-grinding plate progresses, and remains unchanged once the impregnation process is successfully completed, even after 100 revolutions of the precision-grinding plate against the advanced ceramic under 40 N of normal force. Therefore, the measurement of the frictional coefficient can replace costly and time-consuming process of estimating the level of impregnation of diamond grain on the precision-grinding plate, which has been performed by using scanning electron microscope, and be employed as an index to determine the level of impregnation of diamond grain.

키워드

참고문헌

  1. Sonnenfeld, R., 'Fly Height, Pitch, and Crown Measurement of Hard-disk Sliders by Capacitance Strip,' IEEE Transactions on Magnetics, Vol. 28, No. 5, pp. 2545-2547, 1992 https://doi.org/10.1109/20.179551
  2. Gatzen, H. H., Maetzig, J. C, 'Nanogrinding,' Precision Engineering , Vol. 21, pp. 134-139, 1997 https://doi.org/10.1016/S0141-6359(97)00082-2
  3. Gatzen, H. H., Maetzig, J. C, Schwave, M. K., 'Precision machining of rigid disk Head Sliders,' IEEE Trans., Vol. 32, pp. 1843-1849, 1996 https://doi.org/10.1109/20.492875
  4. Taniguchi, N., 'Future Trends of Nanotechnology,' Int. J. Japan Soc. Pre. Eng., Vol. 26, pp. 1-7, 1992
  5. Chen, C, Sakai, S., Inasaki, I., 'Lapping of Advanced Ceramics,' Materials Manufact. Proc, Vol. 6, pp. 211-226, 1991 https://doi.org/10.1080/10426919108934753
  6. Touge, M., Matsuo, T., 'Removal rate and surface roughness in high-precision lapping of Mn-Zn ferrite,' Annals CIRP, Vol. 45, pp. 307-310, 1996 https://doi.org/10.1016/S0007-8506(07)63069-8
  7. Chang, Y. P., 'An Investigation of the AE signals in the lapping process,' Annals CIRP, Vol. 45, pp. 331-334, 1996 https://doi.org/10.1016/S0007-8506(07)63074-1
  8. Gatzen, H. H., Ma, X., Scherge, M., Jhon, M. S., Bauer, C. L., 'Observations Regarding the Tribological Properties of SiC and AlTic Sliders,' IEEE Transactions on Magnetics, Vol. 32, No. 5, pp. 3783-3785, 1996 https://doi.org/10.1109/20.538835