Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Design of a Vertical Lathe for the Improved Stability at High Speed Machining

고속가공의 안정성 향상을 위한 수직선반의 설계

  • Published : 2003.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The vertical lathe is a very popular machine tool in modem manufacturing industries because of its small area of installation. The small installation area is highly desirable for the flexibility improvement of the manufacturing systems such as FMS, CIM, and IMS. The vertical lathe, however, has much taller height compared to the traditional horizontal lathe, and consequently more severe vibrations. In this study, the structure of a vertical lathe is analyzed to investigate the dynamic properties and further to establish some ideas of the design alteration for the improved dynamic stability even at the higher operating speed. The simulation model is implemented to apply those design alterations for the optimization. The result of this study is not only prosperous but also ready to be applied to the optimum design of various machine tool structures for the improved stability.

Keywords

References

  1. McConnell K. G., 1995, Vibration Testing, John Wiley & sons, Inc., New York
  2. Fertis D. G., 1995, Mechanical and Structural Vibration, John Wiley & sons, Inc., New York, pp. 197-241
  3. Timoshenko S. P. and Woinowsky-Krieger S., 1959, Theory of Plates and Shells, McGraw- Hill
  4. Rajalingham C., Bhat R. B. and Xistris G. D., 1996, 'Vibration of Rectangular Plates using Plate Characteristic Functions as Shape Functions in the Rayleigh-Ritz Method,' Journal of Sound and Vibration, Vol. 193, No. 2, pp. 497-509 https://doi.org/10.1006/jsvi.1996.0298
  5. Kantorovich L. V. and Krylov V. I., 1964, Approximate Methods in Higher Analysis, Groningen, The Netherlands, Noordhoff
  6. Han Joong Cho and Seung Hoon Ro, 1999, 'Effect of Design Parameters on the Variation of Natural Frequencies of the Uniform and the Nonuniform Cantilever Beams,' Transactions of the KSME, A, Vol. 23, No. 4, pp. 697-708
  7. Seung Hoon Ro, Han Joong Cho, and Eun Hwan Choi, 2000, 'Analysis of the Free Vibrations of Rectangular Plates Using Database,' Transactions of the KSME, A, Vol. 24, No. 8, pp. 1978-1990