DOI QR코드

DOI QR Code

Calculation of Sidewall Lateral Stiffness of a Radial Tire Using Material Properties of Rubber Compounds

고무배합물의 물성을 이용한 레이디얼 타이어의 사이드월 횡강성 계산

  • 김용우 (순천대학교 기계자동차공학부) ;
  • 김종국 (순천대학교 대학원)
  • Published : 2003.10.01

Abstract

This paper has considered the calculation of lateral stiffness of radial tire's sidewall, which consists of cord stiffness and rubber sheet stiffness, by using the material constants of rubber compounds of tire. We have suggested and illustrated how to calculate the rubber sheet lateral stiffness by considering the following aspects. First, the rubber sheet consists of various kinds of rubber compounds with different thickness along the sidewall in the radial direction. Secondly, equivalent Young's modulus of the rubber sheet can be calculated by using available experimental data of rubber compounds. The present method enables us to divide the calculation domain as many as we want, which can reduce numerical error in the calculation of geometrical and mechanical properties. We have illustrated the calculation by using the data of the radial tire for passenger car of P205/60R15.

Keywords

References

  1. Akasaka, T. and Kabe, K., 1979, 'Deformation and Cord Tension of a Bias Tire in Contact with the Road,' Tire Science and Technology, Vol. 5, No. 4, pp. 171-201 https://doi.org/10.2346/1.2167239
  2. Koga, H., Okamoto, K. and Tozawa Y., 1977, 'Internal Stress Analysis of the Tire under Vertical Loads using Finite Element Method,' Tire Science and Technology, Vol. 5, No. 2, pp. 102-118 https://doi.org/10.2346/1.2167231
  3. Tielking, J. T., 1965, 'Plane Vibration Characteristics of a Pneumatic Tire Model,' SAE 650492
  4. Clark, S. K., 1965, 'The Rolling Tire under Load,' SAE 650493
  5. Potts, G. R. and Bell, C. A., Charek, L. T. and Roy, T. K., 1977, 'Tire Vibrations,' Tire Science and Technology, Vol. 5, No. 4, pp. 202-225 https://doi.org/10.2346/1.2167240
  6. Pacejka, H., 1981, 'Tire In-plane Dynamics,' in Mechanics of Pneumatic Tires edited by Clark, S. K., pp. 726-784
  7. Takayama, M. and Yamagishi, K., 1983, 'Simulation Model for Tire Vibration,' Tire Science and Technology, Vol. 11, No. 1, pp. 38-49 https://doi.org/10.2346/1.2150977
  8. Huang, S. C. and Soedel, W., 1987, 'Effects of Coriolis Acceleration on the Free and Forced In-plane Vibrations of Rotatind Rings on Elastic Foundation,' Journal of Sound and Vibration, Vol. 115, No. 2, pp. 253-274 https://doi.org/10.1016/0022-460X(87)90471-8
  9. Jenkins, J., 1982, 'The Circumferential Contact Problem for the Belted Radial Passenger Car Tire,' Vehicle System Dynamics, Vol. 11, pp. 325-343 https://doi.org/10.1080/00423118208968703
  10. Stutts, D. S. and Soedel, 1992, W., 'A Simplified Dynamic Model of the Effect of Internal Damping on the Rolling Resistance in Pneumatic Tires,' Journal of Sound and Vibration, Vol. 155, No. 1, pp. 153-164 https://doi.org/10.1016/0022-460X(92)90652-E
  11. Robecchi, Edoardo and Amici, Luigi, 1973, 'Mechanics of the Inflated Tire,' Tire Science and Technology, Vol. 1, No. 3, pp. 290-345 https://doi.org/10.2346/1.2167169
  12. Ridha, R. A. and Clark, S. K., 1981, 'Tire Stress and Deformation' in Mechanics of Pneumatic Tires edited by S. M. Clark, pp. 482-489, U.S. Department of Transportation National Highway Traffic Safety Administration
  13. Yamazaki, S., Ogasawara, S., Akasaka, T., 1987, 'Lateral Stiffness of Radial Tires and Effect of Lowering Aspect Ratio,' JSAE Review, Vol. 8, No. 1, pp. 56-63
  14. Nicholson, D. W., 1976, 'A Note on the Classical Net Analysis of the Inflated Tire Profile,' Tire science and Technology, Vol. 4, No. 4, pp. 256-259 https://doi.org/10.2346/1.2167227
  15. Rotta, J., 1949, 'Zur Statik des Luftreifens,' Ingenieur Archiv, Vol. 17, pp. 129-141 https://doi.org/10.1007/BF00571969
  16. M. A. Crisfield, 1997, Non-linear Finite Element Analysis of Solids and Structures: Advanced Topics, John Wiley & Sons
  17. Jones, Robert M., 1975, Mechanics of Composite Materials, McGraw-Hill Book Company
  18. Tonuk, E. and Unlusoy, Y. S., 2001, 'Prediction of Automobile Tire Cornering Force Characteristics by Finite Element Modeling and Analysis,' Computers & Structures, Vol. 79, pp. 1219-1232 https://doi.org/10.1016/S0045-7949(01)00022-0
  19. Kumar, M., 'Experimental Characterization of Mechanical Behavior of Cord-Rubber Composites,' M.S. thesis, Mechanical Engineering, University of Oklahoma, Norman, OK, June 1981