Composites Research

  • 제16권4호
  • /
  • Pages.51-58
  • /
  • 2003
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지

유전기법을 이용한 접착 조인트의 실시간 경화 모니터링

On-line Cure Monitoring of Adhesive Joints by Dielectrometry

  • 권재욱 (LG디지털 디스플레이 연구소) ;
  • 진우석 (한국과학기술원 기계공학과) ;
  • 이대길 (한국과학기술원 기계공학과)
  • 발행 : 2003.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

접착 조인트의 안전성은 사용되는 열경화성 접착제의 경화상태에 많은 영향을 받기 때문에, 실시간으로 접착 조인트의 경화를 모니터링 할 수 있다면 조인트의 품질을 향상시킬 수 있다. 본 연구에서는 조인트의 경화 중 접학제의 소산계수를 측정하여 이를 접착제의 경화도로 환산할 수 있는 기법을 제안하였다. 접착제의 소산계수와 경화도의 관계를 실험적으로 연구하였으며, 온도와 경화도에 따라 민감하게 변하는 소산계수로부터 온도가 미치는 영향을 제거하였다. 연구결과 접착제의 소산계수는 그 경화율과 유사한 경향을 보임을 알 수 있었다.

Since the reliability of adhesively bonded joints is much dependent on the curing status of thermosetting adhesive, the on-line cure monitoring during the cure of adhesively joints could improve the quality of adhesively bonded joints. In this work, the dielectric method which measures the dissipation factor of the adhesive during the cure of joints and converts it into the degree of cure of the adhesive was devised. The relation between the dissipation factor and the degree of cure of adhesive was investigated, which could eliminate the temperature effect on the dissipation factor that is a strong function of the degree of cure and temperature of adhesive. From the investigation, it was found that the dissipation factor showed a trend similar to the cure rate of the adhesive.

키워드

참고문헌

  1. Journal of Appllied Polymer Science v.28 Time-Temperature-Transformation (TTT) Cure Diagram: Modeling the Cure Behavier of Themosets Enns,J.B.;Gillham,J.K. https://doi.org/10.1002/app.1983.070280810
  2. Journal of Appllied Polymer Science v.27 Relationship between Viscoelastic Properties and Gelation in Thermosetting Systems Tung,C.Y.M.;Dynes,P.J. https://doi.org/10.1002/app.1982.070270220
  3. Journal of Materials Processing Technology v.113 Measurement of the Degree of Cure of Glass Fiber Epoxy Composites Using Dielectrometry Bang,K.G.;Kwon,J.W.;Lee,D.G.;Lee,J.W. https://doi.org/10.1016/S0924-0136(01)00657-4
  4. Proceeding of the 6th Annual ASM/ESD Advanced Composite Conference A Role of Cure Monitoring Techniques for On-line Process Control McDonough,W.G.;Fanconi,B.M.;Mopsik,F.I.;Hunston,D.L.
  5. Proceeding of the 2nd Conference on Advanced Composites Dunamic Dielectric Analysis for Nondestructive Cure Monitoring and Process Controll Kranbuehl,D.E.;Delos,S.E.;Hoff,M.S.;Whitham,M.E.;Weller,L.W.
  6. 33rd International SAMPE Symposium Dielectric Monitoring of Epoxy Cure-Detailed Analysis Wetton,R.E.;Foster,G.M.;Smith,V.R.;Richmond,J.C.;Neill,J.T.
  7. 35th International SAMPE Symposium Dielectric Analysis of Polymer Materials Sichina,W.;Marcozzi,C.L.;Gill,P.S.
  8. Fiber Reinforced Composites Mallick,P.K.
  9. Proceeding of the 5th Annual ASM/ESD Advanced Composite Conference Correlation of Dielectric Cure Index to Degree of Cure for 3051-3056 Graphite Epoxy Day,D.R.;Shepard,D.D.
  10. Polymer Engineering and Science v.34 no.20 Modeling the Dielectric Behavior of Epoxy Resin Blends during Curing Moistros,G.M.;Bucknall,C.B. https://doi.org/10.1002/pen.760342002
  11. Journal of Materials Processing Technology v.37 On-Line Monitoring and Viscosity Measurement of Carbon Fiber Epoxy Composite Materials Kim,J.S.;Lee,D.G. https://doi.org/10.1016/0924-0136(93)90105-F
  12. Journal of Composite Materials v.30 no.13 Measurement of the Degree of Cure of Carbon Fiber Epoxy Composite Materials Kim,J.S.;Lee,D.G. https://doi.org/10.1177/002199839603001302
  13. Sensors and Actuators B v.30 Analysis of Dielectric Sensors for the Cure Monitoring of Resin Matrix Composite Materials Kim,J.S.;Lee,D.G. https://doi.org/10.1016/0925-4005(95)01761-J
  14. Polymer Engineering and Science v.38 no.9 In-Process Control of Epoxy Composite by Microdielectrometric Analysis. Part II: On-Line Real-Time Dielectric Measurements during a Compression Molding Process Stephan,F.;Duteurtre,X.;Fit,A. https://doi.org/10.1002/pen.10327
  15. Journal of Adhesion Science and Technology v.14 The Effects of Surface Roughness and Bond Thickness on the Fatigue Life of Adhesively Bonded Tubular Single Lap Joints Kwon,J.W.;Lee,D.G. https://doi.org/10.1163/156856100743095