References
- Althoff O and Hartung M: Advances in light curing. Am J Dent 13 (special no,):77D-81D, 2000
- Franka S, Ashworth SH, Jandt KD and Mills RW: Light-emitting diode (LED) polymerization of dental composites: flexural properties and polymerization potential. Biomaterial 21: 1379-385, 2000 https://doi.org/10.1016/S0142-9612(00)00029-6
- Mills RW, Jandt KD and Ashworth SH: Dental composite depth of cure with halogen and blue light emitting diode technology. British Dent J 186(8) :388-391. 1999
- Rueggeberg FA. Twiggs SW, Caughman WF and Khajotia S: Lifetime intensity profiles of 11 light curing units. J Dent Res 75:380. 1996
- Nakamura S, Mukai T and Senoh M: Candela-class high brightness InGaN/AIGaN double heterostructure blue-light-emmiting diodes. App1 Phys Lett 64: 1687-1689, 1994 https://doi.org/10.1063/1.111832
- Haitz RH, Craford MG and Wiessman RH:Devices. measureaments and properties. Handbook of optics. Vol 2. NewYork, McGraw-Hill,12:1-39. 1995
- Fujibayashi K, Ishimaru K and Kohno A: A study on light activation units using blue light-emitting diode. J Jap Dent Pres Acad 39:180-188, 1996
- Fujibayashi K, Ishimaru K, Takahashi N and Kohno A: Newly developed curing unit using blue light-emitting diode. Dent Jap 34:49-53. 1998
- Peutzfeldt A, Sahafi A and Asmunssen E: Characterization of resin composites polymerized with plasma arc curing units Dent Mater 16:330-336, 2000 https://doi.org/10.1016/S0109-5641(00)00025-7
- Hofman N, Hugo B, Schubert K and Klaiber B: Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus, and hardness of photo activated resin composites. Clin Oral Invest 4:140-147. 2000 https://doi.org/10.1007/s007840000063
- Munksgaard EC, Peutzfeldt A and Asmussen E: Elution of TEGDMA and BisGMA from a resin and a resin composite cured with halogen or plasma light. Eur J Oral Sci 108:341-345, 2000 https://doi.org/10.1034/j.1600-0722.2000.108004341.x
- Nomoto R: Effect of light wavelength on polymerization of light-cured resins. Dent Mater J 16(1) :60-73, 1997 https://doi.org/10.4012/dmj.16.60
- Jandt KD, Mills RW, Blackwell GB and Ashworth SH: Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent Mater 16:41-47,2000 https://doi.org/10.1016/S0109-5641(99)00083-4
- Mills RW, Uhl A, Blackwell GB and Jandt KD: High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomateriais Barcol Hardness, compressive strength and radiometric properties. Biomaterials 23:2955-2963, 2002 https://doi.org/10.1016/S0142-9612(02)00024-8
- St-Georges AJ, Swift EJ, Thompson JY and Heymann: Curing light intensity effects on wear resistance of two resin composite. Oper Dent 27:410-417, 2002
- Sharkey S, Ray N, Burke F and Ziada H: Surface hardness of light-activated resin composites cured by two different visible-light sources: An in vitro study. Quint Int 32:401-405, 2001
- Gagliani M, Fadini L and Ritzmann RM: Depth of cure efficacy of high-power curing devices vs traditional halogen lamps. J Adhes Dent 4:41-47. 2002
- Kne evi A, Tarle Z, Meniga A. Sutalo J. Pichler G and Ristic M: Photopolymerization of composite resins with plasma light. J Oral Rehabi1 29: 782-786, 2002 https://doi.org/10.1046/j.1365-2842.2002.00897.x
- Kelsey WP. Blankenau RJ. Powell GL, Barkmeier WW and Stromberg EF: Power and time requirements for use of the argon laser to polymerize composite resin. J Clin Laser Med Surg 10:273-278, 1992
- Koliniotou-Kubia E and Jacobson PH: The effect of irradiation time on the physical properties of light-cured resins. Clin Mater 6:21-28. 1990 https://doi.org/10.1016/0267-6605(90)90041-S
Cited by
- Power density of light curing units through resin inlays fabricated with direct and indirect composites vol.35, pp.5, 2010, https://doi.org/10.5395/JKACD.2010.35.5.353