Abstract
According to the data analysis of the regional fracture systems in southern Korea, the fracture orientations show three dominant sets : NNE, NW and WNW. A NNE set is the most abundant and includes most of the largest fractures. The highest fracture density is shown in the Taebaegsan mineralized area corresponding to Ogchon nonmetamorphic belt and the lowest one in the southwestern area of southern Korea. In addition, the density is higher in nonmetamorphic sedimentary rocks such as Choseon Supergroup. Pyeongan Supergroup, Daedong Supergroup and Kyeongsang Supergroup than in Precambrian basements and Jurassic granites. The regional fractures in southern Korea can be classified into four orders designated $F_1,{\;}F_2,{\;}F_3{\;}and{\;}F_4${\;}and{\;}F_4$ on the basis of their trace length. It is quite significant that fractures of each order are self-similar with respect to orientation and the combined fracture length distribution indicates a power-law distribution with an exponent of -2.04. As fractures were analyzed based on the tectonic provinces, Gyeonggj Massif and Kyeongsang Basin have all orders of fractures from $F_1$ to $F_4$. Most of the large scale faults may be ascribed to the products of slip accumulation through multiple deformation. Others besides $F_1$ fractures are thought to be evenly distributed through the whole area of southern Korea.
우리나라의 광역단열도가 작성되었다. 단열들에 대해 장미그림을 그려보면 북북동, 북서, 서북서의 세조의 우세 배향을 보여준다. 단열의 밀도는 태백산 광화대 지역이 가장 높게 나타나고, 태백산지역에서 서울까지 지역, 문경-보은탄전지역과 진안지역, 충남탄전지역, 고령-함안지역, 양산단층 및 가음단층지역 등이 밀도가 높은 편이다. 사천-지리산-전주선의 서남부 지역이 밀도가 가장 낮다. 지질별로는 조선누층군, 평안누층군, 대동누층군, 경상누층군 등 비변성 퇴적암 지역이 선캠브리아 기반암과 쥬라기 화강암 분포지역에 비해 단열 발달 밀도가 높다. 또 쥬라기 화강암에 비해 선켐브리아 기반암에서 단열발달 빈도가 상대적으로 높다. 우리나라의 광역단열을 길이를 토대로 $F_1,{\;}F_2,{\;}F_3,{\;}F_4$의 4등급으로 분류하였다. 등급별 단열의 배향은 자기유사(self-similar)하다고 하겠고 단열의 길이에 대한 누적 수 사이엔 누승법칙(power law) 분포를 지시한다. 지구조 구역별로 볼 때 단열은 경기육괴 지역과 경상분지 지역에서는 $F_1$에서부터 $F_4$까지 모든 등급 단열이 발달하나 그 외 지역은 F$_1$ 단열이 거의 발달되지 않는다. 양산단층을 포함한 대규모 단열들은 대부분 일회의 단층운동에 의해 지금의 연장을 가졌다기보다는 다중변형작용을 통한 변위의 집적으로 지금과 같은 길이를 이루었다고 보아야할 것이다. $F_1$ 단열을 제외한 다른 등급의 단열은 우리나라 전지역을 통해 고르게 발달한다고 볼 수 있다. 또 단열의 밀도는 옥천비변성대에서 가장 높게 나타나고 충남분지와 경상분지도 비교적 높다.