DOI QR코드

DOI QR Code

A Study on Prediction of Stress Intensity Factor and Fatigue Crack Growth Behavior Using the X-ray Diffraction Technique

X-선 회절을 이용한 피로균열진전거동과 응력확대계수 예측에 관한 연구

  • 임만배 (한국원자력연구소) ;
  • 부명환 (한국원자력연구소) ;
  • 공유식 (동의대학교 기계산업시스템공학부) ;
  • 윤한기 (동의대학교 기계산업시스템공학부)
  • Published : 2003.05.01

Abstract

This study verified the relationship between fracture mechanics parameters(ΔK, ΔK$\sub$eff/, K$\sub$max/) and X-ray parameters (${\alpha}$$\sub$r/, B) for SG365 steel at elevated temperature up to 300$^{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase low ΔK region, reach to a maximum value at a certain value of K$\sub$max/ or ΔK and then decrease. Residual stress were independent on stress ratio by arrangement of ΔK and half value breadth were independent by the arrangement of K$\sub$max/. The equation of ${\alpha}$$\sub$r/ - ΔK was established by the experimental data. Therefore, tincture mechanics parameters could be estimated by the measurement of X-ray parameters.

Keywords

References

  1. Kim, J. K., Lee, J. S. and Kim, C. S., 1999, 'Fracture Criterion and Fatigue Crack Growth Behavior of Rail Steel Under Mode I & Mixed Mode Loading,' Trans. of the KSME, A, Vol. 23, No. 6, pp. 1039-1047
  2. Lee,O.S., 1998, 'Fatigue Life Prediction by Statistical Approach Under Constant Amplitude Loading,' Trans. of the KSME, A, Vol. 12, No. 1, pp. 67-72
  3. Baek, U. B., Yoon, K. B., Lee, H. M., and Suh, C. M., 2000, 'Creep-Fatigue Crack Growth at CrMo Steel Weld Interface,' Trans. of the KSME, A, Vol. 24, No. 12, pp. 3088-3095
  4. 日本材料學會編, 1981, 改定X線應力測定法, 養賢堂
  5. Boo, M. H., Park, Y. C., Yukio Hirose, 1999, 'Tri-axial Stress Analysis of Composite Materials for X-ray Stress Measurement,' Trans. of the KSME, A, Vol. 23, No. 7, pp. 1173-1181
  6. Boo, M. H., Park, Y. C., Yukio Hirose, 1998, 'Influence of Micro Structure on Fatigur Crack Growth Characteristics of WC-Co Cemented Carbids,' Trans. of the KSME, A, Vol. 23, No. 10, pp.1409-1417
  7. Boo, M. H., Park, Y. C., Yukio Hirose, 1999, 'Evaluation of Fracture Mechanics Parameter Using X-ray Fractography Method of WC-CO Cemented Carbids,' Trans. of the KSME, A, Vol. 23, No. 10, pp. 1709-1716
  8. Kazuyuki Matsui, Yukio Hirose, Akiyoshi Chadani, Keisuke Tanaka, 1990, 'Application of X-ray Fractograpic Technique to Actual Failure Analysis,' JSFM, Vol. 24, No. 4, pp. 117-128
  9. 小倉敬二, 三好良夫, 川口眞廣, '高溫疲勞破面の フラクトグラフィ,' 材料, 제35卷, 제394號, pp. 719-724
  10. 吉岡晴夫, Bertrand Guimard, 1986, 'ステンレス鋼の疲勞破面のX線による解析,' 非破壞儉査, 第35卷, 第8號, pp.524-531
  11. Zenjiro Yajima, Yukio Hirose, Keisuke Tanaka, 1983, 'X-ray Diffraction Observation of Fracture Surface of Ductile Cast Iron,' Adv. X-ray Anal. 26, pp.291-298
  12. Yuji Sekita, Shotaro Kodama, Hiroshi Misawa, 1983, 'X-ray Fractography on Fatigue Fracture Surface,' JSMS, Vol. 32, No. 354, pp. 258-263 https://doi.org/10.2472/jsms.32.258
  13. Katsu Nagai, Masaki Kitagawa, Akira Ohtomo, 1984, 'Residual Stress and Half-Value Breadth of Fatigue Fractured Surface of Various Structural Steels Measured by X-ray Diffraction,' JSMS, Vol. 33, No. 365, pp. 204-208 https://doi.org/10.2472/jsms.33.204
  14. Keiji Ogura, Yoshio Miyoshi, Masahiro Kayama, Yoichi Shoji, 1984, 'X-ray Study on Fracture Surface of SM 50A and HT80 Steels,' JSMS, Vol. 33, No. 367, pp. 398-404 https://doi.org/10.2472/jsms.33.398
  15. ASTM Standard E647-97, 1997, 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' pp. 1-6
  16. ASTM E8, 1997, 'Standard test method of Tension Testing of Metallic Materials,' pp. 56-76