참고문헌
- Holm, R., 'Electric contacts,' Almqvist and wiksells, strokholm, p. 203, 1946
- Archard, J. E, 'Contacts and rubbing of flat surface,' J. of APPL. Phys., Vol. 24, p. 981, 1953 https://doi.org/10.1063/1.1721448
- Liou, M. J. and Hasio, H. S., 'Prediction of die wear in high speed hot upset forging,' ERC/NSDM Report, No. 99-33, OSU, 1989
- Hansen, P. H. and Bay, P. H., 'A flexible computer based system for prediction of wear distribution in forming rolls,' Advanced technology of plasticity, Vol. 1, pp. 19-26, 1990
- Kim, T. H., Kim, B. M. and Choi, J. C., 'Prediction of die wear in the wire in the wire drawing process,' J. of Mat. Pro. Tech., Vol. 65, pp. 11-17, 1997
- Sachs, G., et.al., 'Roll wear in finishing trains of hot strip mills,' Iron and Steel Engineer, Vol, 38, pp. 71-92, 1961
- Williams, R.V. and Boxall, G.M., 'Roll surface deterioration in hot strip mills,' J. of The Iron and Steel Institute, pp. 369-377, Apr., 1965
- Ohnuki, A., 'Wear and deterioration of rolling roll and procedure of anti-wear,' J of Japan Soc. Lubr. Eng., Vol. 32, pp. 621-626, 1987
- Lundberg, S. E., 'A new high-temperature test rig for optimization of materials for hot-rolling rolls,' J. of Mat. Pro. Tech., Vol. 36, pp. 273-301, 1993 https://doi.org/10.1016/0924-0136(93)90035-5
- Park, J. W., Lee, H.C., and Lee, S., 'Composition, microstructure, hardness, and wear properties of high-speed steel rolls,' Metall. Mater. Trans. A, Vol. 30 A, pp. 399-409,1999 https://doi.org/10.1007/s11661-999-0329-9
- Minami, A. and Saiki, H., 'Effect of surface hardening by nitriding on thermal softening and deterioration of dies in warm and hot forging,' Advanced Tech. Plasticity, pp. 389-392, 1996
- Alexander Geleji, Bildsame Fromung der Metalle in Rechnung und Versuch, Akademie-Verlag Gmbh, Berlin, 1960
- Shigeru Shida, 'Emprical formula of flow-stress of carbon steels - Resistance to deformation of carbon steels,' J. Japan Society for Technology of Plasticity, Vol. 10, No. 103, pp. 610-617, 1989
- Lee, Y., Choi, S. and Kim, Y.H., 'Mathematical model and experimental validation of surface profile of a workepiece in round-oval-round pass sequence,' J. Mater. Proc. Tech., Vol. 81, pp. 87-96, 2000
- Kim, D.H., Kim, B.M. Lee, Y., Yoo, S.J. and Choo, W.Y., 'Prediction of roll wear using three-dimensional wear program for the hot rollingprocess.' Proceedings, Rolling 2001, Jeju, pp. 90-99, 2001
- Kim, D.H., Kim, D.J., Kirn, H.G., Kim, B.M. and Choi, J.C., 'Process design of a hot forged product using the artificial neural network and the statistical design of experiments,' J. KSPE, Vol. 15, No. 9, pp. 15-24, 1998
- Kim, D.H., Ko, D.C. and Kim, B.M., 'Application of artificial neural network and taguchi method to preform design in metal forming considering workability,' International Journal of Machine Tools and Manufacture, Volume 39, Issue 5, pp. 771-785, May 1999 https://doi.org/10.1016/S0890-6955(98)00055-8
- Kim, D.H., Kim, D.J. and Kim, B.M., 'The application of neural network and statistical method to process design in metal forming process,' International Journal of Advanced Manufacturing Technology, Vol. 15, pp. 886-894, 1999 https://doi.org/10.1007/s001700050146