DOI QR코드

DOI QR Code

열처리 방법에 따른 SOI 기판의 스트레스변화

Stress Evolution with Annealing Methods in SOI Wafer Pairs

  • 서태윤 (서울시립대학교 재료공학과) ;
  • 이상현 (서울시립대학교 재료공학과) ;
  • 송오성 (서울시립대학교 재료공학과)
  • Seo, Tae-Yune (Department of Materials Science and Engineering, The University of Seoul) ;
  • Lee, Sang-Hyun (Department of Materials Science and Engineering, The University of Seoul) ;
  • Song, Oh-Sung (Department of Materials Science and Engineering, The University of Seoul)
  • 발행 : 2002.10.01

초록

It is of importance to know that the bonding strength and interfacial stress of SOI wafer pairs to meet with mechanical and thermal stresses during process. We fabricated Si/2000$\AA$-SiO$_2$ ∥ 2000$\AA$-SiO$_2$/Si SOI wafer pairs with electric furnace annealing, rapid thermal annealing (RTA), and fast linear annealing (FLA), respectively, by varying the annealing temperatures at a given annealing process. Bonding strength and interfacial stress were measured by a razor blade crack opening method and a laser curvature characterization method, respectively. All the annealing process induced the tensile thermal stresses. Electrical furnace annealing achieved the maximum bonding strength at $1000^{\circ}C$-2 hr anneal, while it produced constant thermal tensile stress by $1000^{\circ}C$. RTA showed very small bonding strength due to premating failure during annealing. FLA showed enough bonding strength at $500^{\circ}C$, however large thermal tensile stress were induced. We confirmed that premated wafer pairs should have appropriate compressive interfacial stress to compensate the thermal tensile stress during a given annealing process.

키워드

참고문헌

  1. S. Cristoloveanu, Optoelectronic and Microelectronic Materials Devices, Proceedings. 1998 Conference on, 44 (1998)
  2. J.B. Lasky, Appl. Phys. Lett., 48(1), 78 (1986) https://doi.org/10.1063/1.96768
  3. P.J. Timans, Materials Science in Semiconductor Processing 1, 169 (1988) https://doi.org/10.1016/S1369-8001(98)00031-6
  4. J.W. Lee, C.S. Kang, O.S. Song, C.K. Kim, Thin Solid Films, 394, 272 (2001)
  5. Sang-Hyun Lee, Sang-Don Yi, Tae-Yune Seo, OH-Sung Song, Korean J. Materials Research, 12(2), 117 (2001)
  6. T. Abe, T. Takei, A. Uchiyama, K. Yoshizawa, and Y. Nakazato, Jpn. J. Appl. Phys., 29(12), 00L2311 (1990) https://doi.org/10.1143/JJAP.29.L2311
  7. W.P. Maszara, G. Goetz, A. Caviglia, J.B. Mckitterick, J. Appl. Phys., 64(10), 4943 (1998) https://doi.org/10.1063/1.342443
  8. R.H. Dauskardt, M. Lane, Q. Ma, N. Krishma, Engineering Fracture Mechanics, 61, 141 (1998) https://doi.org/10.1016/S0013-7944(98)00052-6
  9. Q.-Y. Tong, U. Goesele, Science and Technology, New York, John Wiley & Sons, (1999)
  10. T. Martini, J. Steninkirchner, U. Gosele, J. Electrochem. Soc., 144(1), 354 (1997) https://doi.org/10.1149/1.1837409