대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

IPMSM 구동의 에너지 절감을 위한 효율 최적화 제어

Efficiency Optimization Control for Energy Saving of IPMSM Drive

  • 정동화 (순천대 공대 전기제어공학과) ;
  • 이정철 (순천대 공대 전기제어공학과) ;
  • 이홍균 (순천대 공대 전기제어공학과)
  • 발행 : 2002.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Interior permanent magnet synchronous motor(IPMSM) is widely used in many applications such as an electric vehicle, compressor drives of air conditioner and machine tool spindle drives. In order to maximize the efficiency in such applications, this paper is proposed the optimal control method of the armature current. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM The optimal current can be decided according to the operating speed and the load conditions. The proposed control algorithm is applied to IPMSM drive system, the operating characteristics controlled by efficiency optimization control are examined in detail by simulation.

키워드

참고문헌

  1. J. C. Andreas, 'Energy-efficiency electric motors,' New York, Marcel Dekker, 1992
  2. J. Davoine, R. Parret and H. Le-Huy, 'Operation of a self controlled synchronous motor without a shaft position sensor,' IEEE Trans., IA, vol. 19, no. 2, pp. 217-222, 1993
  3. S. Bolognani, R. Oboe and M. Zigliotto, 'DSP-based extended kalman filter estimation of speed and rotor position of a PM synchronous motor,' IEEE Conf. IECI, pp. 2097-2102, 1994 https://doi.org/10.1109/IECON.1994.398143
  4. A. B. Kulkarni and M. Ehsani, 'A novel position elimination technique for the interior permanent magnet synchronous motor drive,' IEEE Trans. Ind. Appl., vol. 28, pp. 144-150, 1992 https://doi.org/10.1109/28.120223
  5. R. Wu and G. R. Slemon, 'A permanent magnet motor drive without shaft sensor,' IEEE Trans. IA, vol. 27, pp. 1005-1011, 1991 https://doi.org/10.1109/28.90359
  6. A. Kusko and D. Galler, 'Control means for minimization of losses in ac and dc morot drives,' IEEE Trans. IA, vol. 19, pp. 561-570, 1983
  7. R. S. Colby and D. W. Novotny, 'Efficiency operation of surface mounted PM synchronous motors,' IEEE Trans., IA, vol. 25, pp. 1048-1054, 1987
  8. R. S. Colby and D. W. Novotny, 'Efficiency-optimizing permanent-magnet synchronous motor drive,' IEEE Trans., IA, vol. 24, pp. 462-469, 1988 https://doi.org/10.1109/28.2897
  9. B. K. Bose, 'A high-performance inverter-fed drive system of an interior permanent magnet synchronous machine,' IEEE Trans., IA, vol. 24, pp. 987-997, 1988 https://doi.org/10.1109/28.17470
  10. Y. Nakamura, T. Kudo, F. Ishibashi and S. Hibino, 'High-efficiency drive due to power factor control of a permanent magnet synchronous motor,' IEEE Trans., PE, vol. 10, pp. 247-253, 1995 https://doi.org/10.1109/63.372609