References
- Lin, C.T. and Kao, P.W., 1996, 'Fatigue Delamination Growth in Carbon Fibre-reinforced Alumunum Laminates,' Composites, A, Vol. 27A, pp. 9-15 https://doi.org/10.1016/1359-835X(95)00006-N
- Lee, S. and Munro, M., 1986, 'Evaluation of In-plane Shear Test Methods for Composite Materials by the Decision Analysis Technique,' Composites, Vol. 17, No. 1, pp. 13-22 https://doi.org/10.1016/0010-4361(86)90729-9
- Pindera, M.J., Choksi, G., Hidde, J. S. and Herakovich, C.T., 1987, 'A Methodology for Accurate Shear Characterization of Unidirectional Composites,' Journal of Composite Materials, Vol. 21, pp. 14-1184 https://doi.org/10.1177/002199838702100102
- Chamis, C. C. and Sinclair, J. H., 1977, 'Ten-deg Off-axis Test for Shear Properties in Fiber Composites,' Experimental Mechanics, Vol. 17, No.9, pp. 339-346 https://doi.org/10.1007/BF02326320
- Pagano, N. J. and Halpin, J. C., 1968, 'Influence of End Constraint in the Testing of Anistropic Bodies,' Journal of Composite Materials, Vol. 2, No.1, pp. 18-31 https://doi.org/10.1177/002199836800200102
- Pindera, M. J. and Herakovich, C. T., 1986, 'Shear Ccharacterization of Unidirection Composites with the Off-axis Tension Test,' Experimental Mechanics, Vol. 26, pp. 103-112 https://doi.org/10.1007/BF02319962
- Sun, C. T. and Chung, J., 1993, 'An Oblique End-tab Design for Testing Off-axis Composite Specimens,' Composites, Vol. 24, pp. 619-623 https://doi.org/10.1016/0010-4361(93)90124-Q
-
Pierron, F. and Vautrin, A., 1996, 'The
$10^{\circ}$ Off-axis Tensile Test: a Critical Approach,' Composites Science and Technology, Vol. 56, pp. 483-488 https://doi.org/10.1016/0266-3538(96)00004-8 - Kawai, M., Morishita, M., Satoh, and H Tomura, 1997, 'Effect of End-tab Shape on Strain Field of Unidirectional CarbonlEpoxy Composite Specimens Subjected to Off-axis Tension,' Composites, A, Vol. 28A, pp. 267-275 https://doi.org/10.1016/S1359-835X(96)00122-4
- Swanson, S.R., Messick, M. and Toombes, G.R., 1985, 'Comparison of Torsion Tube and Iosipescu In-plane Shear Test Results for a Carbon Fibre-Reinforced Epoxy Composite,' Composites, A, Vol. 16, No.3, pp. 220-224 https://doi.org/10.1016/0010-4361(85)90605-6
- Walrath, D.E. and Adams, D.F., 1983, 'The Iosipescu Shear Test as Applied to Composite Materials,' Experimental Mechanics, Vol. 23, No. 1, pp. 105-110 https://doi.org/10.1007/BF02328688
- Walrath, D.E. and Adams, D.F., 'Verification and Application of the Iosipescu Shear Test Method,' Report UWME-DR-103-1, Department of Mech. Eng., University of Wyoming, Laramie, WY(June 1984)
- Lee, D.J. and Jeong, T.H., 1996, 'Effective Longitudinal Shear Modulus of Continuous Fiber-Reinforced 2-Phase Composites,' Transactions of the KSME, A, Vol. 20, No.9, pp. 2770-2781
- Yoon, H.K., Cheng, H.Y., Park, W.J., and Hue, C.W., 1995, 'The Behavior of Crack Growth Rate for AP AL and CP AL Patched with FRP Laminate in Aluminum Alloy Plate,' Transactions of the KSME, Vol. 19, No.4, pp. 1013-1022
- Hull, D., 1981, An Introduction to Composite Materials, Cambridge University Press