Abstract
This study was for analysing the sedimentary rock slope stability and providing the reinforcement method that can heighten stability. The study area consists of Cretaceous basalt or basaltic tuff belonging to Hak-Bong Basalt Formation in Ha-Yang Group. Nature of geological structure confirmed in this area ars bedding, joint and fault. Majority of geological structure that affect most relationship rock slope stability is bedding. It is shown that dip direction is 120~160/15~25. In other structure, joint sets are shown that dip direction of set 1 is 310~330/65~85 and set 2 is 230~250/70~85. Joint set 3 shows above 85$^{\circ}$ high angle on NE trend although do not show clear. Stability analysis about rock slope used kinematic analysis, limit equilibrium method and FLAC by numerical analysis method. FLAC is continuum model that use Fintie Defferentce Method, but could use Interfaces Module and get discrete model's analysis effect such as UDEC.
이 연구는 활동 가능성이 높은 퇴적암 사면에 대한 안정성을 분석하기 위해 수치해석을 수행하고, 안정성을 확보할 수 있는 보강공법을 제시하기 위한 목적으로 수행되었다. 연구지역은 백악기 하양층군의 학봉 현무암층에 해당하는 지역으로 대부분이 현무암질 응회암으로 구성되어 있으며, 지질 구조요소로는 크게 1차 구조 요소인 층리와 2차 구조요소인 절리 및 단층이 확인되었다 층리는 단사구조를 보이는데, 대부분의 경우 경사방향이 120~160/15~25(dip direction/dip)이고, 절리의 경우에는 크게 3개 조의 절리군이 확인되는데 세트 1은 310~330/65~85, 세트 2는 230~250/70~85이며, 세트 3은 뚜렷한 연장성을 보이지는 않지만 020의 경사방향에 85$^{\circ}$이상의 고각을 보이고 있다. 사면에 대한 안정성 해석은 운동학적 해석과 한계평형 해석을 수행한 후, 수치해석 방법으로 FLAC을 이용하였다. FLAC은 유한차분법을 이용하는 연속체 역학모델이지만, Interfaces Module을 이용하여 UDEC과 같은 불연속체 모델의 해석효과를 얻을 수 있었다.