References
- Buonopane, R. A., Troupe, R. A. and Morgan, J. C., 1963, 'Heat Transfer Design Method for Plate Heat Exchngers,' Chem. Eng. Prog., Vol. 59, No. 7, pp. 57-61
- Cooper, A. and Usher, J. D., 1983, Heat Exchanger Design Handbook, Chap. 3.7, Hemisphere publishing, New York
- Kandikar, S. G. and Shah, R. K., 1989, 'Multipass Plate Heat Exchangers Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements,' ASME Journal of Heat Transfer, Vol. 111, pp. 300-313 https://doi.org/10.1115/1.3250678
- Bogaert, R. and Bloes, A., 1995, 'Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range,' Experimental Heat Transfer, Taylor & Francis, No. 8, pp. 293-311
- Holger Martin, 1996, 'A Theoretical Approach to Predict the Performance of Chevron-type Plate Heat Exchangers,' Chemical Engineering and Processing 35, pp. 301-310 https://doi.org/10.1016/0255-2701(95)04129-X
- Muley, A. and Manglik, R. M., 1999, 'Experimental Study of Turbulent Flow Heat Transfer ;Pressure Drop in a Plate Heat Exchanger with Chevron Plates,' ASME Journal of Heat Transfer, Vol. 121, pp. 110-117 https://doi.org/10.1115/1.2825923
- Yan, Y.Y., Lio, H.C. and Lin,T.F., 1998, 'Condensation Heat Transfer and Pressure Drop of Refrigerant R134A in a Plate Heat Exchanger,' Int. Journal of Heat and Mass Transfer 42, pp. 993-1006 https://doi.org/10.1016/S0017-9310(98)00217-8
- Yan, Y.Y., Lin, T.F., 1999, 'Evaporation Heat Transfer and Pressure Drop of Refrigerant R134A in a Plate Heat Exchanger,' ASME Journal of Heat Transfer, Vol. 121, pp. 118-126 https://doi.org/10.1115/1.2825924
- Kim, Y.S. and Lee, J.H., 1998, 'An Experimental Study on Evaporation Heat Transfer Characteristics and Pressure Drop in Plate Heat Exchanger,' SAREC pp. 746-751
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single-Sample Experiments,' Mech. Eng., Vol. 75, No. 1, pp. 3-12
- Hewitt, G. F., and Roberts, D. N., 1969, 'Studies of Two-Phase Flow Patterns by Simultaneous Flash and X-Ray Phtography,' AERE-M2159
- Bennett, J. A. R., Collier, R. J .G., Pratt, H. R. C. and Thornton, J. D., 1961, 'Heat Transfer to Two-Phase Gas-liqid Systems-part1,' Trans. Instn. Chem. Engrs. (London), 3(1961) 113
- Schrock V. E. and Grossman 1962, 'Fluid Convection Boiling in Tubes,' Nuclear Science and Engineering, Vol. 12, No. 4, pp. 471-481
- Gungor K. E. and Winterton R. H. S., 1986, 'A General Correlation for Flow Boilng in Tubes and Annuli,' Int. J. Heat Mass Transfer, Vol. 29, No. 3, pp. 351-358 https://doi.org/10.1016/0017-9310(86)90205-X
- Kandlikar S. G., 1990, 'A General Correlation for Saturated Two-Phase Flow Boilng Heat Transfer Inside Horizontal and Vertical Tubes,' Journal of heat transfer, Vol. 112, pp. 219-228 https://doi.org/10.1115/1.2910348
Cited by
- Numerical Simulation of the Fully Developed Flow and Heat Transfer of a Plate Heat Exchanger Taking into Account Variation in the Corrugation Height vol.36, pp.1, 2012, https://doi.org/10.3795/KSME-B.2012.36.1.001