Abstract
In this study, the solution combustion method was employed to synthesize perovskite PZT ceramics. Multicomponent oxides can be prepared by the solution combustion synthesis using redox exothermic reaction of precursor solutions. The results of DTA/TG showed exothermic peaks in 214$^{\circ}C$ and 350$^{\circ}C$. Those were caused by the differences of the thermal decomposition behavior of oxidizer and fuel. The combustion reaction was completed at 370$^{\circ}C$ during heating procedure, but the product was not transformed into perovskite. The thermal decomposition behavior of both oxidizer and fuel were considered during solution combustion process at 600$^{\circ}C$, which showed tetragonal single phase PZT ceramics with 50 nm crystalline size. The lattice constant a was 3.997 ${\pm}$ 0.001 ${\AA}$ and the lattice constant c was 4.147${\pm}$0.001 ${\AA}$.
본 연구에서는 전구체 용액의 산화환원 발열반응을 이용하여 다성분계 산화물을 제조할 수 있는 용액연소합성법을 이용하여 페로브스카이트 구조 PZT 세라믹스를 합성하고자 하였다. 산화제/환원제 전구체 혼합물의 열분석(DTA/TG) 결과 산화제와 환원제의 열분해 거동의 차이로 인해 214$^{\circ}C$와 35$0^{\circ}C$에서 발열 피크가 나타났다. PZT세라믹스 합성을 위한 승온 과정에서는 37$0^{\circ}C$에서 연소반응이 일어났으나, 페로브스카이트로의 상전이는 일어나지 않았다. 용액연소과정 중 산화제와 연료의 열분해 거동을 고려하여 $600^{\circ}C$에서 제조한 생성물은 결정크기가 50nm인 정방정의 단일상으로 이루어진 PZT세라믹스이었다. 격자상수를 측정한 결과 a는 3.997$\pm$0.001 $\AA$이었으며, c는 4.147$\pm$0.001 $\AA$으로 나타났다.