Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Performance Evaluation of the Diamond Tool in Honing

호닝 가공에 사용되는 다이아몬드 공구의 성능평가에 관한 연구

  • 김민주 (동아대학교 대학원 기계공학과) ;
  • 이승수 (동아대학교 대학원 기계공학과) ;
  • 전언찬 (동아대학교 기계.산업시스템공학부)
  • Published : 2002.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study is to evaluate the tool performance in honing using diamond reamer and present grounds whether the localized products are sufficiently competitive comparing with the existing imported ones. The heads of the tool performance evaluation are roundness, roughness, tool life of the workpiece and so on. When evaluating the tool performance, cutting process is divided by three areas which are rough semi-finish and finish cut. cloning improves the accuracy such as boring and reaming after manufacturing the inside diameter, and finishing directly by honing is a recent trend. This honing is used greatly In hard cutting materials like cemented carbides and it is the CBN and diamond that is used in hard cutting materials. Both of them are expensive and most oi them are imported.

Keywords

References

  1. Technical Paper Diamond and CBN Honing Technology Flores, Gerhard
  2. Public Works v.127 no.10 Making the abest Use of Diamond Abrasive Technology Anon
  3. Trenie i lznos v.18 no.3 Forming Antifriction Properties of Friction Pairs in the Process of Diamond Honing with Active Lubricant Coolants Ryzhox, Yu. E.
  4. Svekhtnerdye Materialy no.5 On Decreasing the Depth of Deformed Layer in Diamond Honing Barabola, A. V.;Strizhakov, V. L.;Chepovetskij;Kiev;Ukr,E. Kh.;Chalyj, V.T.
  5. Journal of KSPE v.13 no.6 A Study on the Internal Grinding of Tungsten Carbide Materials to Improve the Machining performance S. I. Heo
  6. Annals of the CIRP v.47 no.1 Development of Resin Bonded Diamond Wheels with Improved Wear Resistance Using Surface Modified Fine Grains Treated by Radio-Frequency Magnetron Sputtering Takuya Semba;Hirokazu Fujiyama;Hisayoshi Sato https://doi.org/10.1016/S0007-8506(07)62832-7
  7. Annals of CIRP v.46 no.1 Surface Roughness Generation Mechanism of Ultraprecision Grinding of Optical Materials with a Cup-typed Resinoid-bonded Diamond Wheel Y. Namba;M. Shiokawa;J. Yu https://doi.org/10.1016/S0007-8506(07)60819-1
  8. Journal of KSPE v.10 no.1 The Lapping Characteristics of Single Crystal Diamond(1st Report) Lapping Anisotropy of the Crystal Planes K.K. Jang;Kenjiro Uegami;Kentaro Tamamura
  9. 機械工作法 徐南燮
  10. 한국공작기계학회 논문집 v.9 no.3 열린 홀을 가진 2사이클 엔진실린더의 호닝가공시 호닝의 정밀도에 미치는 혼스톤의 영향 한규택;장명진