Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on Determination of Shear Center of Beam Having Arbitrary Cross Section

임의의 단면을 갖는 보의 전단중심 결정에 관한 연구

  • 오택열 (경희대학교 기계산업시스템공학부) ;
  • 변창환 (경희대학교 대학원 기계공학과) ;
  • 유용석 ((주)칸티바이오) ;
  • 권영하 (경희대학교 기계산업시스템공학부)
  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

It is important to determinate the shear center of beam having arbitrary cross-section in structures. In this study, we have introduced the determination of shear center that gets the equivalent stiffness matrix representing arbitrary cross section of beam and applies energy equivalence theory. This method shows the results of applying on examples that we know the exact and approximate solution of open and cross section of beam. This study also compares with the shear center of composite rotor blade got by the experiment and by the suggested method.

Keywords

References

  1. E. Reissner, 'A Note on the Shear Center Problem for Shear-Deformable Plates,' Int. J. Solids Structures, Vol. 32, No. 5, pp. 679-682, 1994 https://doi.org/10.1016/0020-7683(94)00151-L
  2. E. Reissner, 'The Shear Center Problem for Nonlinear Material Behavior,' Transactions of the ASME, Vol. 62, pp. 822-823, 1995 https://doi.org/10.1115/1.2897024
  3. J. B. Kosmatka, 'General Behavior and Shear Center Location of Prismatic Anisotropic Beams via Power Series,' Int. J. Solids Structures, Vol. 31, No. 3, pp. 417-439, 1994 https://doi.org/10.1016/0020-7683(94)90114-7
  4. R. W ndle, 'Calculation of the Cross Section Properties and Shear Stress of Composite Rotor Blade,' Vertica, Vol. 6, 1982
  5. R. J. Guyan, 'Reduction of Stiffness and Mass Matrices,' AIAA Journal, Vol. 3, pp. 380, 1965 https://doi.org/10.2514/3.2874
  6. B. M. Irons, 'Structural Eigenvalue Problems ; elimination of Unwanted Variables,' AIAA Journal, Vol. 3, pp. 961-962, 1965
  7. G. C. Wright, G. A. Miles, 'An Economical Method for Determining the Smallest Eigenvalues of Large Linear Systems,' International Journal for Numerical Methods in Engineering, Vol. 3, pp. 25-33 https://doi.org/10.1002/nme.1620030106
  8. M. Geradin, 'Error Bounds for Eigenvalue Analysis by Elimination of Variables,' Journal of Sound and Vibration,' Journal of Sound and Vibration, Vol. 19, pp. 111-132 https://doi.org/10.1016/0022-460X(71)90601-8
  9. 주진, '힌지 없는 헬리콥터 로우터의 정지 비행시 동적특성에 관한 실험적 연구,' 서울대학교 박사학위 논문, 1993
  10. Taek-Yul Oh, Myung-Jin Choi, Yong-Seok Yu, Kyung-Duck Chae, 'Determination of the Principal Directions of Composite Helicopter Rotor Blades with Arbitrary Cross Sections,' KSME International Journal, Vol. 14, No. 3, pp. 291-297, 2000
  11. 유용석, 최명진, 오택열, '임의 단면을 갖는 복합재료 회전익의 주축계 결정에 관한 연구,' 대한기계학회논문(A), 제 21 권, 제 6 호, pp. 981-987, 1997
  12. The MacNeal-Schwendler Corporation, 'MSC/NASTRAN Dynamics Seminar Notes,' The MacNeal-Schwendler Corporation, pp. 4-9 - 4-11, 1992
  13. Arthur P. Boresi, Richard J. Schmidt, Omar M. Sidebottom, 'Advanced Mechanics of Materials,' John Wiley & Sons, pp. 331-361, 1993