DOI QR코드

DOI QR Code

Estimation of Pollutants Exhausted :From vehicles for Tunnel ventilation Control

터널환기제어를 위한 차종별 오염물 배출량 추정

  • Published : 2002.01.01

Abstract

The tunnels built in recent years are equipped with traffic counters and pollution sensors (mostly, CO and Vl sensors). Utilizing these built-in sensors, it is possible to develop an algorithm to estimate the amount of pollutants exhausted from the each class of cars passing through the tunnel. These estimated data can be effectively utilized not only for ventilation control but also for designing ventilation facilities. The diffusion of pollutants in a tunnel can be described with one-dimensional diffusion-convection equation. This equation is approximated with interpolation functions and weighted residual method converting to adequate form for standard state estimate algorithms. With this converted equations, a least square optimization based algorithm is developed, whose outputs are the estimated amounts of pollutants emitted from each class of cars. In order to verify the feasibility of the developed algorithms, simulations are performed with the real data acquisitioned from the Tunnae tunnel located in Young-Dong highway in Korea.

Keywords

References

  1. 김태형, 1999, 터널환기시설의 제어알고리듬 개발에 관한연구, 한국건설기술연구원 보고서, pp.2,3
  2. Marrakech, R. A., 1991, Permanent International Association of Road Congress, 21th World Road Congress, 1991 Report
  3. Mizuno, A., 1991, An Optimal Control with Ventilated Road Tunnel, Proc. of Int. Sym. on Fluid Control, Measurement, Mechanics, and Flow Visualization,pp. 393-399
  4. Koyama, T., 1997, Online-learning Type of Ventilation Control Systems in Longitudinal-flow Road Tunnels, T. lEE Japan, Vol. 117-D, No.8, pp. 970-979
  5. Maarsingh, R. A. and Swart, L., 1991, Wind-Tunnel Experiments on Wind Effects at Tunnel Portals, The 7th International Symposium on Aerodynamics and Ventilation of Vehicle Tunnels, Brighton, UK, Elsevier Applied Science, pp. 545-561
  6. Ljung, L., 1996, System Identification, Theory for the User, 2nd ed., Prentice Hall
  7. Reddy, J.N., 1993, An Introduction to Finite Element Method, 2nd ed., McGraw-Hill
  8. 정일록, 1999, 자동차 공해발생과 공해 저감을 위한 검사제도 개선방안, 자동차공해연구소 보고서, pp. 14-17