• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.347-354
• /
• 1991

In this paper, the Automatic Tracking Window(ATW) algorithm is applied to the Generalized Cross-Correlation(GCC) time delay estimation algorithm as a preprocessing. The Linear Prediction(LP) algorithm, which is a pararmetric spectral estimation algorithm, is applied to the time delay estimation. And the ATW, a preprocessing algorithm is applied to this algorithm too. This paper shows that the ATW algorithm attenuates the sidelobes very much and improves the resolution of the timedelay estimation.

• Journal of Astronomy and Space Sciences
• /
• 제35권4호
• /
• pp.263-277
• /
• 2018

This paper presents a vision-based relative pose estimation algorithm and its validation through both numerical and hardware experiments. The algorithm and the hardware system were simultaneously designed considering actual experimental conditions. Two estimation techniques were utilized to estimate relative pose; one was a nonlinear least square method for initial estimation, and the other was an extended Kalman Filter for subsequent on-line estimation. A measurement model of the vision sensor and equations of motion including nonlinear perturbations were utilized in the estimation process. Numerical simulations were performed and analyzed for both the autonomous docking and formation flying scenarios. A configuration of LED-based beacons was designed to avoid measurement singularity, and its structural information was implemented in the estimation algorithm. The proposed algorithm was verified again in the experimental environment by using the Autonomous Spacecraft Test Environment for Rendezvous In proXimity (ASTERIX) facility. Additionally, a laser distance meter was added to the estimation algorithm to improve the relative position estimation accuracy. Throughout this study, the performance required for autonomous docking could be presented by confirming the change in estimation accuracy with respect to the level of measurement error. In addition, hardware experiments confirmed the effectiveness of the suggested algorithm and its applicability to actual tasks in the real world.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.177-184
• /
• 2020

In this paper, we studied to direction of arrival (DoA) estimation to use DoA and optimum weight algorithms in coherent interference channels. The DoA algorithm have been considerable attention in signal processing with coherent signals and a limited number of snapshots in a noise and an interference environment. This paper is a proposed method for the desired signal estimation using MUSIC algorithm and adaptive beamforming to compare classical subspace techniques. Also, the proposed method is combined the updated weight value with LCMV beamforming algorithm in adaptive antenna array system for direction of arrival estimation of desired signal. The proposed algorithm can be used with combination to MUSIC algorithm, linearly constrained minimum variance beamforming (LCMV) and the weight value method to accurately desired signal estimation. Through simulation, we compare the proposed method with classical direction of in order to desired signals estimation. We show that the propose method has achieved good resolution performance better that classical direction arrival estimation algorithm. The simulation results show the effectiveness of the proposed method.

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.51-57
• /
• 2018

In this paper, we investigate the impact of channel estimation error on the D2D power control algorithm. In the previous work, D2D power control algorithm has been proposed under the assumption that the channel between the transmitter and the corresponding receiver is perfectly estimated. In reality, the channel estimation error is more often the case. The first question is that the power control algorithm designed for perfect channel estimation is still valid under the channel estimation error environment ? The second question is, if it is not valid, what could be the possible remedy for the channel estimation error ? In this paper, to answer the first question, we investigate the impact of the channel estimation error on the power control algorithm. We first review the D2D power control algorithm designed for perfect channel estimation. Then, we model the channel estimation error. Finally, we summarize the main results observed from the analysis of the simulation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.408-412
• /
• 2009

In this paper, a new efficient algorithm for global motion estimation is proposed. This algorithm uses a previous 4-parameter model based global motion estimation algorithm and M-estimator for improving the accuracy and robustness of the estimate. The first algorithm uses the block based motion vector fields and which generates a coarse global motion parameters. And second algorithm is M-estimator technique for getting precise global motion parameters. This technique does not increase the computational complexity significantly, while providing good results in terms of estimation accuracy. In this work, an initial estimation for the global motion parameters is obtained using simple 4-parameter global motion estimation approach. The parameters are then refined using M-estimator technique. This combined algorithm shows significant reduction in mean compensation error and shows performance improvement over simple 4-parameter global motion estimation approach.

• Journal of Information Processing Systems
• /
• 제18권3호
• /
• pp.293-301
• /
• 2022

Direction of arrival (DOA) estimation of space signals is a basic problem in array signal processing. DOA estimation based on the multiple signal classification (MUSIC) algorithm can theoretically overcome the Rayleigh limit and achieve super resolution. However, owing to its inadequate real-time performance and accuracy in practical engineering applications, its applications are limited. To address this problem, in this study, a DOA estimation algorithm with high parallelism and precision based on an analysis of the characteristics of complex matrix eigenvalue decomposition and the coordinate rotation digital computer (CORDIC) algorithm is proposed. For parallel and single precision, floating-point numbers are used to construct an orthogonal identity matrix. Thus, the efficiency and accuracy of the algorithm are guaranteed. Furthermore, the accuracy and computation of the fixed-point algorithm, double-precision floating-point algorithm, and proposed algorithm are compared. Without increasing complexity, the proposed algorithm can achieve remarkably higher accuracy and efficiency than the fixed-point algorithm and double-precision floating-point calculations, respectively.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.986-994
• /
• 2012

This paper is concerned with the application of the vision control algorithm with weighting matrix in robot point placement task. The proposed vision control algorithm involves four models, which are the robot kinematic model, vision system model, the parameter estimation scheme and robot joint angle estimation scheme. This proposed algorithm is to make the robot move actively, even if relative position between camera and robot, and camera's focal length are unknown. The parameter estimation scheme and joint angle estimation scheme in this proposed algorithm have form of nonlinear equation. In particular, the joint angle estimation model includes several restrictive conditions. For this study, the weighting matrix which gave various weighting near the target was applied to the parameter estimation scheme. Then, this study is to investigate how this change of the weighting matrix will affect the presented vision control algorithm. Finally, the effect of the weighting matrix of robot vision control algorithm is demonstrated experimentally by performing the robot point placement.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.360-364
• /
• 2009

This paper suggests the techniques in determining the values of the steady-state equivalent circuit parameters of a three-phase induction machine using genetic algorithm. The parameter estimation procedure is based on the steady-state phase current versus slip and input power versus slip characteristics. The propose estimation algorithm is of non-linear kind based on selection in genetic algorithm. The machine parameters are obtained as the solution of a minimization of objective function by genetic algorithm. Simulation shows good performance of the propose procedures.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.397-401
• /
• 2006

In this paper, we proposed a high precision location estimation algorithm using an enhanced decision scheme for RTLS and analyzed its performance in point of an average estimation error distance at 2D coordinates searching area, $300m\times300m$ and LOS propagation environments. Also the performance was compared with that of conventional TDOA algorithm according to the number of available reader and received sub-blink. From the results, we confirmed that the proposed location estimation algorithm using an enhanced decision scheme was able to improve an estimation accuracy even in boundary region of searching area. Moreover, effectively reduced an error distance in entire searching area so that increased the stability of location estimation in RTLS. Therefore, we verified that the proposed algorithm provided a more higher estimation accuracy and stability than conventional TDOA.

• 한국컴퓨터산업학회논문지
• /
• 제5권2호
• /
• pp.275-280
• /
• 2004

본 논문에서는 움직임 벡터(motion vector)를 추정하는 새로운 고속 알고리즘을 제안하였다. 제안된 알고리즘은 블록 합 피라미드 알고리즘의 움직임 추정 정확도를 유지하면서 연산량을 감소시키기 위하여 Efficient Multilevel Successive Elimination Algorithm의 diamond mesh기법을 개선한 후, 탐색점에서의 MAD추정기법을 적용하여 블록 합 피라미드 알고리즘에 적용한 것이다. 실험을 통하여 제안된 기법이 블록 합 피라미드 알고리즘의 연산량을 효과적으로 줄일 수 있음을 확인하였다.