Journal of the Korean Applied Science and Technology (한국응용과학기술학회지)
- Volume 18 Issue 2
- /
- Pages.153-159
- /
- 2001
- /
- 1225-9098(pISSN)
- /
- 2288-1069(eISSN)
DOI QR Code
Preparation of Glass-like High-density Carbon by Polymerization of Thermosetting Resin
열경화성 수지의 축중합에 의한 고밀도 유리상 탄소의 제조
- Kim, Ji-Hyun (Division of Ceramic and Chemical Engineering, Myongji University) ;
- Kim, Hee-Seok (Division of Ceramic and Chemical Engineering, Myongji University) ;
-
Lim, Yun-Soo
(Division of Ceramic and Chemical Engineering, Myongji University) ;
-
Park, Hong-Soo
(Division of Ceramic and Chemical Engineering, Myongji University) ;
-
Kim, Myung-Soo
(Division of Ceramic and Chemical Engineering, Myongji University)
- 김지현 (명지대학교 공과대학 세라믹화학공학부) ;
- 김희석 (명지대학교 공과대학 세라믹화학공학부) ;
-
임연수
(명지대학교 공과대학 세라믹화학공학부) ;
-
박홍수
(명지대학교 공과대학 세라믹화학공학부) ;
-
김명수
(명지대학교 공과대학 세라믹화학공학부)
- Published : 2001.06.30
Abstract
Due to its low density, good mechanical properties and chemical inertness, glassy carbon(GC) has been studied for appications in several fields. A raw thermosetting resin of furanic resin was polymerized with a curing agent of p-toluenesulfonic acid monohydrate. The maximum yield of GC was obtained at the curing agent content of 1.0 wt% in furanic resin. In order to make thick GC, the affect of graphite filler addition to the furanic resin was investigated. The density and electrical resitivity of GC after graphitization were 1.45