DOI QR코드

DOI QR Code

Stress wave propagation in composite materials

  • Shen, Siyuan J. (Department of Mechanical and Aerospace Engineering, The George Washington University) ;
  • Pfister, Jens C. (Department of Mechanical and Aerospace Engineering, The George Washington University) ;
  • Lee, James D. (Department of Mechanical and Aerospace Engineering, The George Washington University)
  • 발행 : 2001.04.25

초록

The linear constitutive relations and the failure criteria of composite materials made of thermoviscoelastic solids are presented. The post-failure material behavior is proposed and the dynamic finite element equations are formulated. However, a nonlinear term is kept in the energy equation because it represents the effect of the second law of thermodynamics. A general purpose nonlinear three-dimensional dynamic finite element program COMPASS is upgraded and employed in this work to investigate the interdependence among stress wave propagation, stress concentration, failure progression and temperature elevation in composite materials. The consequence of truthfully incorporating the second law of thermodynamics is clearly observed: it will always cause temperature rise if there exists a dynamic mechanical process.

키워드

참고문헌

  1. Allen, D.H., and Harris, C.E. (1987), "A thermomechanical constitutive theory for elastic composites with distributed damage. I: Theoretical formulation", Int. J. Solids Struct., 23, 1301-1318. https://doi.org/10.1016/0020-7683(87)90107-7
  2. Allen, D.H., Harris, C.E., and Groves, S.E. (1987), "A thermomechanical constitutive theory for elastic composites with distributed damage. II: Application to matrix cracking in laminated composites", Int. J. Solids Struct., 23, 1319-1338. https://doi.org/10.1016/0020-7683(87)90108-9
  3. Allen, D.H., Harris, C.E., Groves, S.E., and Norvel, R.G. (1988), "Characteristics of stiffness loss in crossply laminates with curved matrix cracks", J. Compos. Mater., 22, 71-80. https://doi.org/10.1177/002199838802200105
  4. Eringen, A.C. (1989), Mechanics of Continua, Robert E. Krieger Publishing Company, Malabar, Florida.
  5. Flaggs, D.L. (1985), "Prediction of tensile matrix failure in composite laminates", J. Compos. Mater., 19, 29-50. https://doi.org/10.1177/002199838501900103
  6. Fukunaga, H., Chou, T.W., Peters, P.W.M., and Schulte, K. (1984), "Probabilistic failure strength analyses of graphite/epoxy cross-ply laminates", J. Compos. Mater., 18, 339-356. https://doi.org/10.1177/002199838401800403
  7. Hashin, Z. (1980), "Failure criteria for unidirectional fiber composites", J. Appl. Mech., 47, 329-334. https://doi.org/10.1115/1.3153664
  8. Hwang, W.C., and Sun, C.T. (1989), "Failure analysis of laminated composites by using iterative threedimensional finite element method", Comput. and Struct., 33(1), 41-47. https://doi.org/10.1016/0045-7949(89)90127-2
  9. Jones, R.M. (1976), Mechanics of Composite Materials, Technomic Publishing CO, Lancaster, PA.
  10. Kattan, P.I., and Voyidjis, G.Z. (1993), "Micromechanical modeling of damage in uniaxially loaded unidirectional fiber-reinforced composite laminate", Int. J. Solids Struct., 30, 19-36. https://doi.org/10.1016/0020-7683(93)90130-Y
  11. Kelly, A. (1989), Concise Encyclopedia of Composite Materials, Pergamon Press, Oxford.
  12. Lee, J.D. (1982), "Three dimensional finite element analysis of damage accumulation in composite laminate", Comput. and Struct., 15(3), 335-350. https://doi.org/10.1016/0045-7949(82)90026-8
  13. Lee, J.W., Allen, D.H., and Harris, C.E. (1989), "Internal state variable approach for predicting stiffness reduction in fibrous laminated composites with matrix cracks", J. Compos. Mater., 23, 1273-1291. https://doi.org/10.1177/002199838902301205
  14. Pachajoa, M.E., Lee, K.Y., and Lee, J.D. (1994), "Progressive failure analysis of composite structures made of thermoelastic solids", Compos. Eng., 4(5), 503-523. https://doi.org/10.1016/0961-9526(94)90019-1
  15. Pachajoa, M.E., Frances, M.K., and Lee, J.D. (1995), "Stress and failure analysis of composite structures", Eng. Fracture Mech., 50, 883-902. https://doi.org/10.1016/0013-7944(94)E0065-O
  16. Pfister, J. (1998), An Integrated Three-dimensional Nonlinear Dynamic Finite Element Analysis of Wave Propagation, Stress Singularity, Failure progression, and Temperature Elevation in composite material, Master thesis, CMEE department, the George Washington University.
  17. Pryce, A.W., and Smith, P.A. (1993), "Matrix cracking in unidirectional ceramic matrix composites under quasistatic and cyclic loading", Acta. Metall. Mater., 41(4), 1269-1281. https://doi.org/10.1016/0956-7151(93)90178-U
  18. Solti, J.P., Mall, S., and Robertson, D.D. (1995), "Modeling damage in unidirectional ceramic matrix composites", Compos. Sci. and Technol., 54, 55-66. https://doi.org/10.1016/0266-3538(95)00041-0
  19. Solti, J.P., Mall, S., and Robertson, D.D. (1995), "Modeling of progressive damage in unidirectional ceramic matrix composites", "Recent advances in composite materials", Joint Appl. Mech. and Mater. Summer Conference, S.R. White, H.T. Hahn and W.T. Jones, eds., Los Angeles, CA, 56, 1-11.
  20. Tolson, S., and Zabarar, N. (1991), "Finite element analysis of progressive failure in laminated composite plates", Comput. and Struct., 38(3), 361-376. https://doi.org/10.1016/0045-7949(91)90113-Z
  21. Voyidjis, G.Z., and Kattan, P.I. (1993), "Damage of fiber-reinforced composite materials with micromechanical characterization", Int. J. Solids Struct., 30, 2757-2778. https://doi.org/10.1016/0020-7683(93)90153-X