무인반송 차량시스템의 정밀 추적제어

Precise Tracking control of Automated Guided Vehicle System

  • 신두진 (인하대 공대 전자전기컴퓨터공학부) ;
  • 허욱열 (인하대 공대 전자전기컴퓨터공학부)
  • 발행 : 2001.07.01

초록

This paper proposed a fuzzy logic cross coupled controller which can enhance the path tracking performance of optically guided AGV(Automated Guided Vehicle). The AGV follows the guide path, it cannot be avoid the deviation from the path due to the inevitable error and the deviation must be corrected. Optically guided AGV used in industrial area is controlled by On-Off controller generally, the experimental AGV has three optical sensors in front body. In this structure, we could not know the leaving distance accurately and steering angle from the guided line, so AGV could not be controlled properly with conventional controller in the case of increasing or decreasing velocity. If we mount additional sensors the AGV, we could know the leaving distance and steering angle from the guided line and proper error compensating methode can be applied. But because cost of sensors are high, the cost of total system is increasing. So, in this paper, to improve the tracking performance of AGV which has the minimum number of sensors and fuzzy logic cross coupled controller is proposed. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

키워드

참고문헌

  1. A. Gailet, 'Optical automatic guidance system of a mobile robot for industrial manufacturing' , Proc. 1st Int. Conf. on A.G.Vs, pp. 79-88, 1981
  2. M. Tajima, 'Computer controlled wire guided vehicle in FMS', Proc. 1st Int. Conf. on A.G.Vs, pp. 137-144, 1981
  3. M.H.E. Larcombe, 'Stability of wire guided vehicle in FMS', Proc. 1st Int. Conf. on A.G.Vs, pp. 1-10, 1981
  4. J.Cselenyi, S.Kovacs, L.Pap, 'New concepts in the fuzzy logic controlled path tracking strategy of the differential steered AGVs', Proc. of 5th Int. Workshop on Robotics, pp. 587-592, 1998
  5. L. Feng, Y. Koren, J. Borenstein, 'Cross-Coupling Motion controller for mobile robot', IEEE Control Systems Magazine, pp. 35-43, Dec. 1993 https://doi.org/10.1109/37.248002
  6. Y. Koren, 'Cross-Coupled Biaxial Computer Controls for Manufacturing Systems', ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 102, No. 4, pp. 265-272, 1980
  7. K. Srinivasan, P. K. Kulkarni, 'Cross-Coupled Control of Biaxial Feed Drive Servomechanisms', ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 112, No. 2, pp. 225-232, 1990
  8. H. Y. Chuang, C. H. Liu, 'Cross-Coupled Adaptive Feedrate Control for Multiaxis Machine Tools', ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 113, pp. 451-457, 1991
  9. Electro-Craft Corporation, DC Motors speed controls servo systems, Pergamon Press, 1977
  10. E. H. Mamdani, S. Assilian, 'An Experiment in Linguistic Synthesis with a Fuzzy Logic Controller', International Journal of Man-Machine Studies, Vol. 7, No.1, pp. 1-13, 1975