• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권8호
• /
• pp.361-366
• /
• 2001

This thesis proposes a fuzzy logic cross coupled controller for a multi axis servo system. The overall control system consists of three elements: the axial position controller, the speed controller, and a fuzzy logic cross coupled controller. In conventional multi axis servo system, the motion of each axis is controlled independently without regard to the motion of other axes, in which the contour error, defined as the shortest distance between the desired and actual contours is compensated only by the position error of each axis. This decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties, Therefore, the multi axis servo system must receive and evaluate the motion of all axes for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However the existing cross coupled controllers cannot overcome friction, backlash and parameter variation. Also, since it is difficult to obtain an accurate mathematical model of multi axis system, here we investigate a fuzzy logic cross coupled controller method. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.58-61
• /
• 2001

The purpose of this paper is a fuzzy logic controller for XY positioning system. The overall control system consists of three parts, the position controller, the speed controller, the fuzzy logic controller. Precise tracking is achieved by fuzzy logic controller. In practice, such systems contain many uncertainties. Therefore, the XY positioning system must receive and evaluate the motion of all axis for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However, the existing Cross coupled controllers cannot overcome friction, backlash and parameter variation. So, we propose a fuzzy logic controller of XY positioning system. Experimental results show that the proposed fuzzy logic controller is effective to improve the contouring accuracy of XY positioning system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권7호
• /
• pp.313-317
• /
• 2001

This paper proposed a fuzzy logic cross coupled controller which can enhance the path tracking performance of optically guided AGV(Automated Guided Vehicle). The AGV follows the guide path, it cannot be avoid the deviation from the path due to the inevitable error and the deviation must be corrected. Optically guided AGV used in industrial area is controlled by On-Off controller generally, the experimental AGV has three optical sensors in front body. In this structure, we could not know the leaving distance accurately and steering angle from the guided line, so AGV could not be controlled properly with conventional controller in the case of increasing or decreasing velocity. If we mount additional sensors the AGV, we could know the leaving distance and steering angle from the guided line and proper error compensating methode can be applied. But because cost of sensors are high, the cost of total system is increasing. So, in this paper, to improve the tracking performance of AGV which has the minimum number of sensors and fuzzy logic cross coupled controller is proposed. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• 전자공학회논문지SC
• /
• 제37권1호
• /
• pp.10-18
• /
• 2000

본 논문에서는 2축 서보시스템에 적용하기 위한 새로운 윤곽 모델링을 이용하여 퍼지논리형 상호결합제어기를 제안한다. 일반적인 각 축 독립제어기는 각 축의 동적 변수와 루프 이득의 불일치로 인해 윤곽 성능을 감소시킨다. 실제적으로 이러한 시스템은 많은 불확실성도 보유하고 있다. 상호결합제어기는 정확한 윤곽을 구하기 위해 모든 축의 위치 오차 정보를 동시에 이용한다. 그러나 일반적인 상호결합제어기는 마찰, 백래쉬 그리고 매개변수 변화를 극복하지 못한다. 또한 정확한 다축 시스템의 수학적 모델을 얻기 힘들기 때문에 서보시스템의 퍼지논리형 상호결합제어기를 제안한다. 이와 더불어 새로운 윤곽 오차 벡터 계산법을 제시한다. 제안한 알고리즘의 성능을 검증하기 위해 실험결과를 나타낸다.