KSTLE International Journal
- Volume 2 Issue 1
- /
- Pages.75-79
- /
- 2001
- /
- 1229-9189(pISSN)
The Effects of Design Parameters on the Friction Characteristics in the Valve Train System
- Kim, Ji-Young (Graduate Student, School of Mechanical & Aerospace. Engineering, Seoul National university) ;
- Han, Dong-Chul (School of Mechanical & Aerospace. Engineering, Seoul National university) ;
- Cho, Myung-Rae (Hyundai Motor Co. Research Institute)
- Published : 2001.06.01
Abstract
This paper is a report on the parametric study of the friction characteristics on the direct acting type OHC valve train system. The numerical simulation was performed by using the IV-TAP. Dynamic analysis by using the lumped mass method was previously performed to define the acting load. The friction characteristics were analyzed by using the partial asperity contact model. The effects of operating conditions and major design parameters on the total driving torque were investigated. From the analytical prediction, it is found that valve spring stillness, surface roughness, and base circle radius are the main factors to reduce the frictional loss on the valve train system.