Tribology and Lubricants

  • 제17권1호
  • /
  • Pages.56-63
  • /
  • 2001
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

외부 가진력을 고려한 사판식 압축기 회전축-베어링계의 동적 거동 해석

Dynamic Behavior Analysis of Rotor-Bearing System Under External Forces in Swash Plate Compressor

  • 김태종 (부산대학교 기계공학부 및 기계기술연구소)
  • 발행 : 2001.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The dynamic behavior of rotor-bearing system used in swash plate compressor has been investigated using the combined methodologies of finite elements and transfer matrices. The finite element is formulated including the field element for a shaft section and the point element for swash plate, disk pulley and bearings. The Houbolt method is used to consider the time march for the integration of the system equations. The transient whirl response of rotating shaft supported on roller bearings is obtained, considering compression forces and unbalance forces at swash plate and driving pulley. And, the steady state displacements of the rotor are compared with a variation in unbalance mass. Results show that the loci of rotating shaft considering unbalance forces and external compression forces are more severe in flutter motion than with only unbalance forces.

키워드

참고문헌

  1. Proc. of Interantional Compressor Engineering Conference v.2 Refrigerating Compressors for Air Conditioning of Passenger Cars Reichelt, J.;Fachhochschule
  2. Journal of Engineering for Industry, Trans. ASME A Finite Element Model for Distributed Parameter Turborotor Systems Ruhl, R. L.;Booker, J. F.
  3. Journal of Engineering for Industry, Trans. ASME The Dynamics of Rotor-Bearing Systems Using Finite Elements Nelson, H. D.;McVaugh, J. M.
  4. Journal of Engineering for Industry, Trans. ASME v.105 Nonlinear Analysis of Rotor-Bearing Systems Using Component Mode Synthesis Nelson, H. D.;Meacham, W. L.
  5. Journal of Vibration and Acoustics, Trans. ASME v.112 Transient Response by Component Modal Synthesis Method Yee, Eric K. L.;Tsuei, Y. G.
  6. American Institute of Aeronautics and Astronautics Journal v.3 no.2 Reduction of Stiffness and Mass Matrices Guyan, R. J.
  7. Journal of Engineering for Industry, Trans. ASME A New Approach for Plante Vibrations : Combination of Transfer Matrix and Finite-Element Technique Dokainish, M. A.
  8. Computers and Structures v.23 no.4 A New Transfer Matrix Method for Response Analysis of Large Dynamic Systems Kumar, A. S.;Sankar, T. S.
  9. Journal of Vibration, Acoustics, Stress, and Reliability in Design, Trans. ASME v.110 On the transient Analysis of Rotor-Bearing Systems Subbiah, R.;Rieger, N. F.
  10. Journal of the Aeronautical Sciences v.17 A Recurrence Matrix Solution for the Dynamic Response of Elastic Aircraft Houbolt, J. C.
  11. Journal of Applied Mechanics, Trans. ASME v.55 Transient Dynamic Analysis of Rotors Using the Combined Methodologies of Finite Elemetns and Trasnfer Matrix Subbiah, R.;Kumar, A. S.
  12. 한국윤활학회지 v.14 no.3 사판식 압축기의 동적 해석 및 마찰손실에 관한 연구 김태종

피인용 문헌

  1. 베어링 특성을 고려한 CNG 압축기의 동적 거동 및 동특성 해석 vol.22, pp.6, 2001, https://doi.org/10.9725/kstle.2006.22.6.342