DOI QR코드

DOI QR Code

Design of Robust Motion Controllers with Internal-Loop Compensator

내부루프 보상기를 가지는 강인 동작 제어기의 설계

  • Published : 2001.10.01

Abstract

Disturbance observer, adaptive robust control, and enhanced internal model control are model based disturbance attenuation methods famous for robust motion controller which can satisfy desired performance and robustness of high-speed/high-accuracy positioning systems. In this paper, these are shown to be the same scheme with different parameterizations. To do this, a generalized framework, called as RIC(robust internal-loop compensator) is proposed and the conventional schemes are analyzed in the RIC framework. Through this analysis, it can be shown that there are inherent similarities between the schemes and advantages of the RIC in the viewpoint of controller design. This is verified through simulations and experiments.

Keywords

References

  1. Nakao, M., Ohnishi, K., and Miyachi, K., 1987, A Robust Decentralized Joint Control Based on Interference Estimation,' Proc. 1987 IEEE Int. Conf. on Robotics and Automation, pp. 326-331
  2. Lee, H. S. and Tomizuka, M., 1996, 'Robust Motion Controller Design for High-Accuracy Positioning Systems,' IEEE Trans. on Industrial Electronics, Vol. 43, No. 1, pp. 48- 55 https://doi.org/10.1109/41.481407
  3. Ohnishi, K., Shibata, M., and Murakami, T., 1996, 'Motion Control for Advanced Mechatronics,' IEEE/ASEM Trans. on Mechatronics, Vol. 1, No. 1, pp. 56-67 https://doi.org/10.1109/3516.491410
  4. 김준식, 오준호, 1996, '불확실한 선형시스템에 대한 강인 외란관측기,' 대한기계학회논문집, Vol. 20, No. 9, pp. 2731-2743
  5. Iwasaki, M., Shibata, T., and Matsui, N., 1999, 'Disturbance-Observer-Based Nonlinear Friction Compensation in Table Drive System,' IEEE/ASME Trans. on Mechatronics, Vol. 4, No. 1, pp. 3-8 https://doi.org/10.1109/3516.752078
  6. Kempf, C. J. and Kobayashi, S., 1999, Disturbance Observer an Feedforward Design for a High-Speed Direct-Drive Positioning Table,' IEEE Trans. on Control System Technology, Vol. 7, No. 5, pp. 513-526 https://doi.org/10.1109/87.784416
  7. Choi, H. T., Kim, B. K., Suh, I. H., and Chung, W. K., 2000, 'Design of Robust High-Speed Motion Controller with Actuator Saturation,' ASME J. of Dynamic Systems, Measurement and Control, Vol. 122, No. 3, pp. 535-541 https://doi.org/10.1115/1.1286520
  8. Yao, B., Al-Majed, M., and Tomizuka, M., 1997, 'High-Performance Robust Motion Control of Machine Tools: An Adaptive Robust Control Approach and Comparative Experiments,' IEEE/ASME Trans. on Mechatronics, Vol. 2, No. 2, pp. 63-76 https://doi.org/10.1109/3516.588624
  9. Yi, L. and Tomizuka, M., 1999, 'Two-Degree-of-Freedom Control with Robust Feedback Control for Hard Disk Servo Systems,' IEEE/ASME Trans. on Mechatronics, Vol. 4, No. 1, pp. 17-24 https://doi.org/10.1109/3516.752080
  10. Choi, B. K., Choi, C. H., and Im, H., 1999, Model-Based Distribance Attenuation for CNC Machining Centers in Cutting Process,' IEEE/ASME Trans. on Mechatronics, Vol. 4, No. 2, pp. 157-168 https://doi.org/10.1109/3516.769542
  11. Zhu, H. A., Hong, G. S., Teo, C. L., and Poo, A. N., 1995, 'Internal Model Control with Enhanced Robustness,' Int. J. Systems Sci., Vol. 26, No. 2, pp. 277-293 https://doi.org/10.1080/00207729508929036
  12. Kim, B. K., Chung, W. K., Choi, H. T., Suh, I. H., and Chang, Y. H., 1999, 'Robust Optimal Internal Loop Compensator Design for Motion Control of Precision Linear Motor,' Proc. 1999 IEEE Int. Symposium on Industrial Electronics, pp. 1045-1050 https://doi.org/10.1109/ISIE.1999.796773
  13. Kim, B. K., Choi, H. T., Chung, W. K., Suh, I. K., Lee, H. S., and Chang, Y. H., 1999, Robust Time Optimal Controller Design for HDD,' IEEE Trans. Magnetics, Vol. 35, No. 5, pp. 3598-3600 https://doi.org/10.1109/20.800602
  14. Corless, M. J. and Leitmann, G., 1981, Continuous State Feedback Guaranteeing Uniform Boundedness for uncertain Dynamic Systems,' IEEE Trans. Automatic Control, Vol. 24, No. 5, pp. 437-443
  15. Khalil, H. K., 1992, Nonlinear Systems, Macmillan
  16. Qu, Z., 1993, 'Robust Control of Nonlinear Uncertain Systems under Generalized Matching Condition,' Automatica, Vol. 29, No. 4, pp. 985-998 https://doi.org/10.1016/0005-1098(93)90101-X
  17. Kim, B. K., Chung, W. K., and Suh, I. H., 2001, 'Performance Tuning of Sliding Mode Controllers : Structural Analysis Approach, Proc. 2001 American Control Conference, pp. 1513-1518 https://doi.org/10.1109/ACC.2001.945940
  18. Kim, B. K., Chung, W. K., 2001, Unified Analysis and Design of Robust Disturbance Attenuation Algorithms Using Inherent Structural Equivalence, Proc. 2001 American Control Conference, pp. 4046-4051 https://doi.org/10.1109/ACC.2001.946332
  19. Yamada, K., Komada, S., Ishida, M., and Hori, T., 1998, 'Analysis and Clssical Control Design of Servo System Using High Order Disturbance Observer,' Proc. 1998 IEEE Int. Conf. on Industrial Electronics, Control, and Instrumentation, pp. 4-9 https://doi.org/10.1109/IECON.1997.670904
  20. Kim, B. K., Chung, W. K., 2001, Performance Predictable Design of Robust Motion Controllers for High-Precision Servo Systems, Proc. 2001 American Control Conference, pp. 2249-2254 https://doi.org/10.1109/ACC.2001.946085
  21. Kim, B. K., Chung, W. K., and Suh, I. H., 2000, 'Robust Synchronizing Motion Control of Twin-Servo Systems Based on Network Modeling,' Proc. 2000 IEEE Conf. on Decision and Control, pp. 1019-1024 https://doi.org/10.1109/CDC.2000.912909