Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Development of Intelligent Supplementary Feature Designer(ISFD) in Injection Molding

사출성형제품 부형상의 지적 설계에 관한 연구

  • 강성남 (한국기술교육대학교 대학원 기계공학과) ;
  • 허용정 (한국기술교육대학교 메카트로닉스공학부)
  • Published : 2001.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The configuration of injection molded part can be classified into primary feature and supplementary feature. Even though supplementary features such as ribs, snap fits and bosses make mold more complicated, which cause the increasement of the mold cost, supplementary features should be attached to primary features because of assembly, reinforcement, moldability and other functional purposes. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to Injection molding. In this paper, the intelligent design tool called ISFD(Intelligent Supplementary Feature Designer) which supplies easy, simple, time and cost-effective design method has been studied and developed. A knowledge-based design system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

Keywords

References

  1. Sang-Gook Kim, Nam P. Suh, 'Knowledge Based Synthesis for Injection Molding,' Robotics & Computer Integrated Manufacturing, Vol. 3, No. 2, pp. 181-186, 1987 https://doi.org/10.1016/0736-5845(87)90100-1
  2. Rosato, D. V. and Rosato, D. V., Injection Molding Handbook, Van Nostrand Reinhold Company inc., 1986
  3. 허용정, 김상국, '사출성형제품의 부형상 설계를 위한 지식형 CAD 시스템에 관한 연구,'대한기계학회논문집 제15권, 제6호, pp. 1933-1947, 1991
  4. Miller, E., 'Plastic Product Design Handbook. Part A : Component,' Marcel Dekker, 1981
  5. Young, W. C., Roark's Formulas for Stress and Strain, McGraw Hill Book Company, New York, 1975
  6. Timoshenko, S. P.and Woinowsky-Krieger, S., 'Theory of Plate and Shells,' McGraw Hill., 19559
  7. Verbicky, J. W., 'Encyclopedia of Polymer Science and Engineering, Vol. 12, John Wiley and Sons, New York, 1988
  8. Carter, S., Kazmer, D., 'Studies of Plastic Boss Design and Methodology,' ANTEC '99, Vol. 3, 1999
  9. Malloy, R. A., Orroth, S. A, Amold, E. S., 'Self Threading Screw Boss Design,' ANTEC' 85, 43st Annual Technical Conference, pp. 744-748, 1985
  10. Suat Genc, Robert W. Messler, Jr., Gary A. Gabriele, 'A Method for Attachment Design Concept Development in Integral Snap-fit,' Jornal of Mechanical Design, ASME, Vol. 122, No. 3, pp.257-264, 2000 https://doi.org/10.1115/1.1287926
  11. Lee, C., Dubin, A., 'New Snap-Fit Design Formula,' ANTEC '88, pp. 1564-1566, 1988
  12. Luscher, A. F., 'Part Nesting as a Plastic Snapfit Attachment Strategy,' ANTEC '96, Vol. 1, pp. 1302-1306, 1996
  13. Satchitanand Kashyap, 'A Feature-based Framework for Attachment Level Snap-Fastener Design in Product,' International Symposium on Assembly and Task, pp. 51-56, 1999 https://doi.org/10.1109/ISATP.1999.782934