HVDC 연계 시스템의 전력계통 안정화 장치의 적정 파라메터 선정에 관한 연구

A Study on the Optimal Parameter Selection of a Power System Stabilizer for HVDC Linked System

  • 김경철 (홍익대학교 전자전기컴퓨터 공학부) ;
  • 최홍규 (홍익대학교 전자전기컴퓨터 공학부) ;
  • 최병숙 (홍익대학교 대학원 전기공학과) ;
  • 강태은 (홍익대학교 대학원 전기공학과) ;
  • 고영곤 (홍익대학교 대학원 전기공학과)
  • 발행 : 2001.09.01

초록

전력 계통 안정화 장치는 전력시스템에 외란이 발생했을 때 저주파수 동요현상을 효과적으로 저감하는 역할을 한다. 본 논문은 제주-해난 HVDC로 연계된 전력시스템에 설치된 PSS의 적정 파라메커 선정이론을 다루었다. 사용한 알고리즘은 위상지연을 적절한 극좌표 이동법으로 보상하고 설정된 댐핑계수가 되도록 이득계수를 구하는 방법이다. PSS 효과를 검증하기 위해 동태 및 과도안정도를 PSS 설치 전과 후로 비교하였다. MATLAB을 근거로 한 PST 프로그램을 사용하여 사례연구 시스템에 적용한 시뮬레이션 결과는 PSS를 설치하므로써 전력시스템이 안정화되어 만족할 만큼의 댐핑효과를 보았다.

Power system stabilizer act efficiently to damp the electromechanical oscillations in interconnected power systems. This paper presents an algorithm for the optimal parameter selection of a power system stabilizer in two-area power systems with a series HVDC link. This method is one of the classical techniques by allocating properly pole-zero positions to fit as closely as desired the ideal phase lead between the voltage reference and the generator electrical power and by changing the gain to produce a necessary damping torque over the matched frequency range. The small signal stability and transient stability studies using the PSS parameters obtained from this method show that a natural oscillation frequency of the study case system is adequately damped. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

키워드

참고문헌

  1. Power System Toolbox Program manual
  2. Power System Oscillations Graham Rogers
  3. CEC alsthorm 재주 해남 HVDC manual
  4. 전력계통 종합 데이터 베이스(전력계통 해석용)
  5. MATLAB User's Guide
  6. Power sysyem Control and Stability P. M. Anderson;A. A Fouad
  7. Power System Stability and Control P. Kundur
  8. IEE High Voltage Direct Currect Transmission Jos Arrillaja