Journal of Mechanical Science and Technology

  • 제14권10호
  • /
  • Pages.1041-1050
  • /
  • 2000
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Effect of Specimen Thickness on the Statistical Properties of Fatigue Crack Growth Resistance in BS4360 Steel

  • 발행 : 2000.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper the effect of specimen thickness on fatigue crack growth with the spatial distribution of material properties is presented. Basically, the material resistance to fatigue crack growth is treated as a spatial stochastic process, which varies randomly on the crack surface. The theoretical autocorrelation functions of fatigue crack growth resistance with specimen thickness are discussed for several correlation lengths. Constant ${\Delta}K$ fatigue crack growth tests were also performed on CT type specimens with three different thicknesses of BS 4360 steel. Applying the proposed stochastic model and statistical analysis procedure, the experimental data were analyzed for different specimen thicknesses for determining the autocorrelation functions and probability distributions of the fatigue crack growth resistance.

키워드

참고문헌

  1. Broek, D., 1988, 'The Practical Use of Fracture Mechanics,' KAP
  2. Buto, S., Sugie, H. and Okazaki, A., 1977, 'Fortran and Numerical Analysis,' Baifukan
  3. Itagaki, H., Ishizuka, T. and Huang, P. Y., 1993, 'Experimental Estimation of the Probability Distribution of Fatigue Crack Growth Lives,' Prob, Eng. Mech., Vol. 8, pp. 25-34 https://doi.org/10.1016/0266-8920(93)90027-S
  4. Kim, S. J., 1999, 'An Analysis of Crack Growth Rate Due to Variation of Fatigue Crack Growth Resistance,' Trans, KSME, Vol. 23, No. 7, pp. 1139-1146
  5. Kozin, F. and Bogdanoff, J. L., 1989, 'Recents Thoughts on Probabilistic Fatigue Crack Growth,' Part 2. Appl. Mech. Rev., Vo. 42, No. 11, S121-S127
  6. Lapetra, C., Mayo, J. and Dominguez, J., 1996, 'Randomness of Fatigue Crack Growth under Constant Amplitude Loads,' Fat. Fract. Eng. Mater. Struct., Vol. 19, pp. 589-600 https://doi.org/10.1111/j.1460-2695.1996.tb00995.x
  7. Mcmaster, F. J., Tabrett, C. P. and Smith, D. J., 1998, 'Fatigue Crack Growth Rates in AL-Li Alloy, 2090. Influence of Orientation, Sheet Thickness and Specimen Geometry,' Fat. Fract. Eng. Mater. Struct., Vol. 21, pp. 139-150 https://doi.org/10.1046/j.1460-2695.1998.00428.x
  8. Ortiz, K. and Kiremidjian, A. S., 1986, 'Time Series Analysis of Fatigue Crack Growth Rate Data,' Eng. Fract. Mech., Vol. 24, pp. 657-676 https://doi.org/10.1016/0013-7944(86)90241-9
  9. Paris, P. C. and Erdogan, F., 1963, 'A Critical Analysis of Crack Growth Propagation Law,' J. Bas. Eng.(Trans. ASTM D) Vol. 85, pp. 528-536
  10. Putatunda, S. K. and Rigsbee, J. M., 1985, 'Effect of Specimen Size on Fatigue Crack Growth Rate in AISI4340 Steel,' Eng. Fract. Mech., Vol. 22, pp. 335-345 https://doi.org/10.1016/S0013-7944(85)80034-5
  11. Shim, D. S. and Kim, J. K., 'A Stochastic Analysis on Variation of Fatigue Crack Propagation due to Thickness Effect,' Trans. KSME, Vol. 22, No. 8, pp. 1523-1532
  12. Sobczyk, K., 1993, 'Stochastic Approach to Fatigue : Experiments, Modelling and Reliability Estimation,' Springer Verlag Wein-New York
  13. Tanaka, S., Ichikawa, M. and Akita, S., 1981, 'Variability of m and C in the Fatigue Crack Propagation Law,' Int. J. Fract., Vol. 17, R121 https://doi.org/10.1007/BF00033350
  14. Virker, D. A., Hillberry, B. M. and Goel, P. K., 1979, 'The statistical nature of fatigue crack propagation,' J of Eng. Mat. and Tech., ASME, Vol. 101, pp. 148-153
  15. Yamazaki, F. and Shinozuka, M., 1986, 'Digital Generation of non-Gaussian Stochastic Fields,' Technical Report, Columbia Univ. Press, pp. 211-235