DOI QR Code
The study was conducted to determine physicochemical parameters in various physical fractions (linter, hull, kernel, oil and meal) of cottonseed of different varieties (MNH 147, CIM 240, NIAB 78, FH 87, CIM 109, MNH 93, FH 682, GOHAR 87, SLS 1 and B 557). Average components of linter, hull, and kernel in different varieties of cotton were 12.21, 28.24 and 70.42%, respectively. Average percentage of meal and oil was 48.97 and 22.09% in seed, and 69.28 and 30.72% in kernel, respectively. Maximum percentage of meal was recovered from variety CIM 240 and lowest in variety CIM 109. Statistical analysls revealed variety differences (p<0.05) in seed and it's components. Average contents of crude protein, crude fiber and ash was 22.31, 17.74 and 4.27% in seed, 2.85, 56.50 and 2.61% in hull; 32.62, 3.45 and 4.01 % in kernel; 47.15, 5.00 and 5.78% in meal, respectively. Average contents of Ca, p, Mg, K, Na and Cl were 0.09, 0.22, 0.26, 0.65, 0.009 and 0.035% in seed; 0.12, 0.07, 0.09, 0.51, 0.020 and 0.034% in hull and 0.16, 0.59, 0.32, 1.01, 0.03 and 0.07% in meal of different varieties of cotton, respectively. Fe, Zn, Cu and Mn were 141.35, 24.55, 186.50 and 27.12 mg/kg in seed; 158.48, 2.06, 74.60, and 22.17 mg/kg in hulls; and 167.62, 20.30, 185.83 and 20.67 mg/kg in meal, respectively. Significant varietal differences were observed in proximate composition and mineral contents of cottonseeds and derived products. Cottonseeds and their products of varieties FH 87, CIM 109 and MNH 93 showed higher nutrient density while lower was observed in varieties CIM 240, SLS I and FH 682.