Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

Analysis of Residual Stresses Induced during Adhesion Process of Chip and Leadframe

칩과 리드페임의 접착과정에서 발생하는 잔류 응력 해석

  • 이상순 (한국기술교육대학교 메카트로닉스공학부)
  • Published : 2000.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with residual stresses induced at the viscoelastic adhesive layer between the semiconductor chip and the leadframe during adhesion process. The adhesive layer has been assumed to be“thermorheologically simple”. The time-domain boundary element method(BEM) has been employed to investigate the behavior of interface stresses. Numerical results show that very large stress gradients are present at the interface corner and such singularity might lead to local yielding or edge delamination.

이 논문에서는, 반도체 칩과 리드프레임을 결합하는 과정에서 점탄성 접착제층에 발생하는 잔류응력 문제를 다루고 있다. 접착제층은 “열유동단순”거동을 한다고 가정하였다. 접착제층에서의 응력들은 경계요소법을 사용하여 조사하였다. 매우 큰 응력 구배가 계면 모서리에서 발생하는데, 그러한 응력들은 국부 항복을 일으키거나, 칩과 리드프레임의 박리를 야기시킬 수 있음을 보여주고 있다.

Keywords

References

  1. International Journal of Fracture v.75 Edge delamination of residually stresses thim film: viscoelastic effects Krishna,A.
  2. International Journal of Fracture v.65 Interfacial crack propagation in a thin viscoelastic film bonded to an elastic substrate Srinivas,M.V.;Ravichandran,G.
  3. Trans. of ASME Journal of Electronic Packaging v.119 Thermal stresses in layered electronic assemblies Jiang,Z.Q.;Huang,Y.;Chandra,A.
  4. Journal of Electronic Packaging v.120 Cooling rate effect on post cure stresses in molded plastic IC packages Yi,S.;Sze,K.Y.
  5. IEEE Transactions, Packaging, and Manufacturing Technology -Part A v.19 A fracture mechanics analysis of the effects of materials properties and geometries of components on various types of package cracks Lee,H.;Earmme,Y.
  6. Quality and Reliability Engineering International v.11 Fracture mechanical characterization of IC-device interface Burger,K.
  7. 석사학위논문, 한국과학기술원 칩과 리드프레임 사이의 계면파괴인성치에 대한 실험적고찰 이새봄
  8. Microelectronic Packaging Handbook Plastic Packaging Pecht,M.G.;Nguyen,L.T.;Tummala,R.R.(et al.)(eds.)
  9. Microelectronic Packaging Handbook Polymers in Packaging Czornyj,G.(et al.);Tummala,R.R.(et al.)(eds.)
  10. Microelectronic Packaging Handbook Thin-Film Packaging Tummala,R.(et al.);Tummala,R.R.(et al.)(eds.)
  11. Trans. of ASME Journal of Electronic Packaging v.120 Constitutive modeling of polymer films from viscoelasticity to viscoplasticity Qian,Z.;Lu,M.;Liu,S.
  12. International Journal of Solids and Structures v.15 Interfacial stresses in viscoelastic adhesive layers due to moisture sorption Weitsmann,Y.
  13. Trans. of ASME Journal of Applied Mechanics v.48 Viscoelastic analysis of adhesively bonded joints Delale,F.;Erdogan,F.
  14. International Journal of Solids and Structures v.35 Boundary element analysis of the stress singularity at the interface corner of viscoelastic adhesive layer Lee,S.S.
  15. International Journal for Numerical Methods in Engineering v.38 Application of high order quadrature rules to time-domain boundary element analysis of viscoelasticity Lee,S.S.;Westmann,R.A.
  16. Journal of Applied Mechanics v.74 Stress singularity resulting from various boundary conditions in angular corners of plates in extensions Williams,M.L.
  17. Trans. of ASME Journal of Applied Mechanics v.35 Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading Bogy,D.B.