참고문헌
- 주조 v.8 no.2 鄭民安
- 주조 v.8 no.2 박흥일;김명호
- 鑄物 v.23 no.1 田中;林松;早川
- AFS Transaction v.60 no.439 H. Morrogh
- AFS Transaction v.79 no.57 E. Campomanes
- AFS Transaction v.70 no.666 P. Pelleg
- AFS Transaction v.84 no.503 R. G. Abron
- 日本鑄物協會 v.5 鑄物分科委員會
Zn을 많이 함유하는 銅scrap(자동차용강판, Zn표면처리강판 등)을 이용하여 구상흑연주철을 제조한 경우 구상화가 제대로 이루어 지지 않았다. Sb을 많이 함유하는 銅scrap을 이용하여 구상흑연주칠을 제조한 경우에는 기지 층의 퍼얼라이트량이 증가하였다. 퍼얼라이트량이 증가하면 인장강도 및 경도는 증가하지만 연산율은 감소하였다. Mn, Cr을 많이 함유한 銅scrap(기계구조용강판, 가단주철)을 이용하여 구상흑연주출을 제조한 경우에는 피얼라이트량이 증가하였으며, 인장강도 및 경도도 증가하였다.
The effect of different kinds of steel scraps, the raw material in the manufacturing of nodular cast iron, on the microstructures and mechanical properties has been investigated Different grades were produced by changing the steel scraps. When nodular graphite cast iron was produced by using Zn rich steel scrap, such as galvanized steel sheet and auto body sheet, mechanical properties were deteriorated due to the decomposition of graphite, so close control must be maintained over this element. Tensile strength and hardness of nodular graphite cast iron which were manufactured by using Sb rich steel scrap were increased while elongation was decreased due to the increased amounts of pearlite within matrix. Mn and Cr contents in the structural steel sheet scrap or malleable iron scrap increased tensile strength and hardness of nodular graphite cast iron by facilitating the formation of pearlite.