Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Analytical Method for Bending Moment of Slab-on-Steel-Girder Bridge

강판형교 바닥판 모멘트의 해석기법

  • 박남회 (고려대학교 토목환경공학과) ;
  • 최진유 (고려대학교 부설 방재과학기술 연구센터) ;
  • 유철수 (고려대학교 토목환경공학과) ;
  • 강영종 (고려대학교 토목환경공학과)
  • Received : 1999.07.12
  • Published : 2000.02.27
Download PDF
⟨ Previous Next ⟩

Abstract

The current specifications for bridge decks requires the same amount of upper and lower reinforcement mats. There have been many empirical activities that the partial elimination of upper reinforcing bars was not caused the structural integrity of a deck. A simplified method is derived based on thin plate theory for three and four-girder-span bridge decks. A simplified method for bridge deck considering the effect of girder deflection is proposed based on a closed-form solution that shows good agreement with the results of finite element models. In this research, a new design approach for deck slabs is proposed based on the simplified method. The negative bending moments in a deck can be evaluated with the simplified method based on the position of a wheel load, the aspect ratio and relative stiffness and the span length. This new approach can lead to a significant reduction of the quantity of the top reinforcing steel bars in a deck. Reducing the quantify of the top reinforcement not only reduces the construction costs for bridge decks, but also reduces the corrosion of reinforcement to a minimum.

현재 현장에서 건설되어지는 콘크리트교량의 바닥판은 상부와 하부에 동일한 철근을 배근한다. 바닥판 상부철근의 부분적인 제거는 구조적인 측면에서 볼 때, 안전성을 위협하지 않는다는 경험적인 연구 결과들이 발표되어왔다. 판이론에 근거하여 강판형교의 3거더와 4거더시 바닥판의 구조적인 거동을 수식적으로 표현하는 간략화 된 방법을 유도하였다. 거더간 상대처짐을 고려한 간략화 된 방법은 유한요소해석의 결과치와 유사한 값을 얻을 수 있었다. 본 연구에서는, 바닥판 슬래브의 새로운 설계개념이 간략화 된 방법을 통해서 제안되었다. 간략화 된 방법의 변수는 하중위치, 형상비, 상대강성비 그리고 지간 길이 등을 선정하였다. 이 새로운 설계접근방법은 바닥판 상부 철근량을 감소시켜줄 것이다. 바닥판 상부 철근량의 감소는 건설비용의 감소와 철근의 부식문제를 최소화 시켜줄 수 있을 것이다.

Keywords

Acknowledgement

Supported by : 건설교통부

References

  1. Analysis and Design of Slab-on-Girder Highway Bridge Decks Cao, L.
  2. J. Struct. Engrg. v.122 no.1 Behavior of RC Bridge Decks with Flexible Girder Cao, L.;Shing, P.B.
  3. Res. Ser. no.CU/SR-93/1 A Case Study of Elastic Concrete Deck Behavior in a Four-Span Prestressed Girder Bridge : Finite Element Analysis Cao, L.;Allen, J.H.;Shing, P.B.
  4. Res. Ser. no.CU/SR-93/1 A Case Study of Concrete Deck Behavior in a Four-Span Prestressed Girder Bridge : Correlation of Field Tests and Numerical Results Cao, L.;Allen, J.H.;Shing, P.B.;Woodham, D.
  5. Proc .. 31d Bridge Engrg. Con？. Transp. Res. Rec. No 1290 Cracking Serviceability and Strength of Concrete Bridge Decks Allen, J.H.
  6. Theory of Plates and Shells Timoshenko, Stephen P.;Woinowsky-Krieger, S.
  7. Theory and Analysis of Plates Szilard, Rudolph
  8. Hwy. Res. Rec. No. 370 Cumulative Fatigue Damage Characteristics of Plain Concrete Ballinger, C.A.
  9. J. Struct. Engrg. v.116 no.5 Behavior of Isotropic R/C Bridge Decks on Steel Girders Fang, I.K.;Worley, J.A.;Burns, N.H.;Klinger, R.E.
  10. Federal Hwy. Admin. Files Minutes of AASHTO bridge subcommittee
  11. Symp. of Hwy. Bridge Floors, ASCE Trans . v.114 Design of I-Beam Bridge Newmark, N.M.
  12. Standard Specifications for Highway Bridges
  13. Standard Specifications for Highway Bridges
  14. Computation of Stre sses in Bridge Slabs due to Wheel Loads Westergaard, H.M.
  15. ABAQUS Theory Manual Hibbitt. Karlsson and Sorensen Inc.
  16. 도로교 표준 시방서-설계/시공및 유지관리편 건설교통부