Abstract
In the friction-type joints the external applied load is transmitted by frictional force acting on the contact area of the plates fastened by the high strength bolts. This frictional force is proportional to the product of the bolt clamping force and slip coefficient of the faying surface. But the bolt clamping force is dependent on many factors when the turn-of-nut method is used. The preserved thread length and length-to-diameter ratios are one of the major factors governing the bolt clamping force. This paper presents the correct method of high strength bolt tightening through the experiment on the mechanical properties on sets of high strength bolts in accordance with preserved thread length and length-to-diameter ratios.
마찰접합에 있어서 작용외력은 고력볼트로 체결된 접합부재간의 마찰면에 작용하는 마찰력에 의해 전달된다. 이 마찰력은 마찰면의 미끄럼계수와 고력볼트 조임력의 곱에 비례한다. 그러나 너트회전법에 의한 조임시 고력볼트 조임력은 많은 인자에 의해 영향을 받는다. 여유나사길이와 길이-직경비는 고력볼트 조임력을 지배하는 중요한 인자 중에 하나이다. 따라서 본 논문은 여유나사길이와 길이-직경비에 따른 고력볼트 세트(F10T, M16, M20, M22, M24)의 기계적 특성에 관한 실험을 통하여 고력볼트의 정확한 체결 방법을 제공하고자 한다.