Settling Characteristics of Natural Loess Particles in Seawater

해수 중에서 자연상태 황토입자의 침강특성

  • KIM Sung-Jae (Department of Marine Environmental Engineering, Institute of Marine Industry, College of Marine Science, Gyeongsang National University)
  • 김성재 (경상대학교 해양과학대학 해양환경공학과, 해양산업연구소)
  • Published : 1999.11.01

Abstract

PSD (particle size distribution) for 2,000 mg/$\ell$ natural loess in seawater showed normal distribution cure at 0 minute settling time, accompanying with very large particle distribution range with its mean particle diameter of 31.6 $\mu$m and coencient of variance of $72.6\%$, With elapsed time it showed that the PSD was rapidly changed from normal distribution cure to abnormal distribution curve, steepened the right-hand side of it and its coefficient of variance was getting increased because of rapid settling of large size particles, Cumulative weight distribution showed that 2,000 mg/$\ell$ natural loess in seawater was almost $100\%$ constituted of particles bigger than 20 $\mu$m in diameter. Ratio of $V_s/(D_{bm})^{1/2}$ for loess particles in seawater was increased with increase of particle size in geometrical progression. Almost all loess particles in seawater had Stokes settling velocity not less than 2,255 times of Brownian diffusion coefficient, There was almost to EDL (about 0.4 nm) around natural loess particles in seawater, Thus, there was always LVDW attractive force between loess particles approaching each other in seawater, and almost no EDL repulsive force. Loess particles were not always in the condition of easy floe formation. Concentration of natural loess in seawater increasing from 400 mg/$\ell$ to 10,000 mg/$\ell$, characteristics of the settling was changed from Type I settling (discrete settling) to Type II settling (flocculation settling). PVD (particle volume distribution) showed that natural loess particles in seawater were largely constituted of two types of particles, such as rapidly settling particles and suspended and dispersed particles for a long time. Amount of the latter was much less than that of the former.

해수 중에서 자연상태의 황토입자의 침강특성에 관한 연구의 요약은 다음과 같다. 1. 2,000mg/$\ell$ 황토용액에 대한 PSD 곡선은 0 min. 침강시간에서 정규분포곡선을 나타내었고 평균입도는 31.6$\mu$m, 변동계수는 $75,6\%$로써 매우 광범위한 입도의 분포상태를 보여 주었다. 그러나 침강시간이 경과함에 따라 비정규분포곡선의 양상을 나타내었다. 한편 무게누적분포곡선에서 거의 $100\%$의 입자가 20$\mu$m 보다 큰 입자로 구성되어 있었다. 2. 해수 중에서 황토입자에 대한 $V_s/(D_{bm})^{1/2}$ 비의 값은 입자의 크기가 증가함에 따라 기하급수적으로 증가하였으며, 1 $\mu$m 입자를 중심으로 이 이상은 $V_s$$(D_{bm})^{1/2}$보다 크고 이 미만은$(D_{bm})^{1/2}$$V_s$ 보다 큰 값을 나타내었다. 20$\mu$m 크기의 입자에 대하여 $V_s/(D_{bm})^{1/2}$ 비의 값은 2,355이었다. 3. 해수 중에서 황토입자는 매우 엷은 EDL 두께 (0.4$\mu$m)를 나타냄으로써 EDL repulsive force가 거의 존재하지 않았으며, 상호 접근하는 황토입자는 모든 간격에서 LVDW attractive force가 EDL repulsive force보다 큰 값을 나타내어 항상 용이하게 floc을 형성할 수밖에 없는 조건에 있었다. 4. 해수 중의 황토입자의 $V_s/(D_{bm})^{1/2}$ 비의 값과 total interaction energy로부터 자연상태의 황토입자는 해수 중에서 외부의 강력한 전단력이 없이는 매우 확산되기 어려운 상태에 있으며, 조류의 수평운동이 적은 내만에서는 입자의 물리적 거동은 침강에 의하여 지배되는 것으로 나타났다. 5. 2,000mg/$\ell$ 황토용액에 대한 침강실험에서 대략 $22.5\%$의 황토는 격렬한 교반에도 불구하고 즉시 침강하였다. 황토농도가 400, 2,000, 10,000mg/$\ell$으로 증가함에 따라 침강특성은 개별입자침강(Type I settling or discrete settling)에서 응결침강(Type II settling or flocculation settling)의 상태로 바뀌었다. 이것은 실제 해양에서 황토입자들 끼리 floc을 형성할 정도로 많은 양의 황토를 적절한 분산장치 없이 살포하는 것은 지양해야 하며 동시에 동일한 농도의 황토용액도 살포방법에 따라 분산의 크기가 달라질 수 있음을 의미하는 것이다. 6. PVD 그래프로부터 자연상태의 황토는 급격하게 침강하는 입자와 장시간 부유하며 천천히 침강하는 입자로 구성되어 있었고 후자의 양이 전자의 양에 비하여 매우 적은 상태로 나타났다. 7. 황토를 이용하여 적조를 효과적으로 제거하기 위해서는 자연상태의 황토를 그대로 사용하기보다는 (1) 미세한 입자상태로 분쇄하고, (2) 적절한 살포장비와 분산장비를 사용하여 해수 중에서 황토입자가 넓게 부유 분산하여 적조생물과 충분한 충돌을 일으키도록 해야한다. 이것은 적어도 황토입자를 이용하여 적조를 응집 제거하려고 할 경우 피할 수 없는 기본적 원리가 되며 동시에 황토 사용량을 줄일 수 있는 하나의 방법이 된다. 8. 일반적으로 입자의 크기는 응집 및 흡착반응에 매우 중요한 인자가 된다. 황토입자는 크기가 작을수록 용이하게 분산시킬 수 있으며 더욱 효과적으로 Cochlodinium 적조를 제거할 수 있다. 실제로 어떤 황토입자의 크기가 적조 제거에 효과적인가는 현장실험을 통하여 침강속도, 수평분산범위, 적조제거효율 등을 조사하여 반드시 결정하여야 한다.

Keywords