Blind Equalizer and Carrier Recovery Circuit Using $\theta$-matching Algorithm in QAM Signal Demodulator

QAM 신호 복조시 자력 등화기와 $\theta$-정합을 이용한 위상 복구 회로

  • 조웅기 (충북대학교 정보통신공학과 정회원) ;
  • 장일순 (충북대학교 정보통신공학과 정회원) ;
  • 정차근 (호서대학교 제어계측공학과 정회원) ;
  • 조경록 (충북대학교 정보통신공학과 정회원)
  • Published : 1999.06.01

Abstract

Many researches on the multi-level QAM(Quadrature Amplitude Modulation) which is known to be a promising digital data transmission method for efficient use of channel bandwidth have been carried on, and their applications to various real fields are now being in progress. However, in the band-limited communication systems, each transmitted symbols is distorted by the ISI(Intersymbol Interference) and the phase error. Therefore, an equalizer and a carrier recovery must be taken into considerations to attenuate the effects of these distortions in the receiver. This paper presents an effective receiver structures that is applicable to the multi-level QAM. The proposed receiver system is consisted of an equalizer with Godard’s blind algorithm and a carrier recovery circuit. The phase error is estimated with a $\theta$-matching algorithm and is used in the carrier recovery to recover the correct phase. The simulation results are included to evaluate performance of the proposed receiver system for the various channel models.

멀티 레벨(Multi-level) QAM(Quadrature Amplitude Modulation)은 전송대역의 효율적인 사용을 위한 전송방식의 하나로 많은 연구가 이루어져 실용화가 진행되고 있다. 이러한 전송방식을 사용하는 수신기에는 전송과정 중 채널에서 발생하는 ISI(Intersymbol Interference) 및 위상 오차(phase error)를 보상하기 위해서는 등화기(equalizer)와 위상 복구(carrier recovery) 회로를 사용해야 한다. 본 논문에서는 멀티 레벨 QAM 시스템에 적용할 수 있는 효과적인 수신기의 모델을 제안한다. 제안된 수신기에는 Godard 알고리즘을 사용하는 자력(blind) 등화기와 등화기의 출력 신호에 포함된 위상 에러를 복원하기 위해 $\theta$-정합을 이용하여 위상 오차를 복원하는 위상 복구 회로를 포함한다. 또한 다양한 채널모델에 대하여 제안한 수신기의 성능을 평가한다.

Keywords

References

  1. IEEE Trans. Commun. v.28 no.11 Self-Recovering Equalization and carrier Tracking in Two-Dimensional Data Communication Systems D. N. Godard
  2. IEEE Trans. Commun v.23 A Method for Self-Recovering Equalization for Multilevel Amplitude-Modulation Y. Sato
  3. IEEE Trans. Commun. v.32 no.8 Blind Equalizer Benveniste;M.Goursat
  4. IEEE Trans. Commun. v.35 Blind Equalization and Carrier Recovery Using a Stop and Go Decision Directed Algorithms G. Picci;G.Prati
  5. IEEE Trans. Acoustics. Speech. and Signal Processing v.31 A New Approach to Multipath Correction of Constant Modulus Signals J. R. Treichler
  6. IEEE Journal of solid-state circuits v.32 no.7 A Multilevel QAM Demodulator VLSI with Wideband carrier Recovery and Dual Equalizing Mode Kazuya Yamanaka
  7. 한국통신학회 논문지 v.19 no.11 QAM 신호를 위한 Blind 등화기, Carrier Recovery 결합에 관한 성능 평가 송재철;최형진
  8. Digital signal Processing E. C. Ifeachor;B. W. Jervis
  9. Communications System J. G. Proakis;M. Salehi
  10. Proc. IEEE v.73 no.9 Adaptive Equalization S. U. H. Qureshi
  11. IEEE Trans. Commun. v.39 no.5 Blind Equalization Using a Tricepstrum-Based Algorithm D. Hatzinakos;C. L. Nikias
  12. IEEE Trans. Commun. v.com-18 no.1 A simple Adaptive Equalizer for Efficient Data Transmission D. Hirsch;W. J. Wolf